Pellet Line from Straw, Tekno Uno
Stock #HG62067
Straw pellet line made by Tekro Uno (Italy). Line was installed in the year 2012 and was running for test runs only. Line includes the following equipment:
- separator of straw
- feeder
- buffer
- crusher
- ventilator
- dust suction
- silo
- pellet mill Stoza (Czech republic)
- cooler for pellets
- storage bin for pellets
- conveyors and related pipes
- complete electrics
Location: SLOVAKIA
Add to Cart
View Details
Pellet Plant, 3 tons/hour, Amandus Kahl
Stock #KS61700
Used Amandus Kahl soft woods pellet plant with capacity approximately 3 tons per hour. Milling equipment by Vecoplan. Equipment includes
- 1) crushing
- 2a) Heating / boiler
- 2b) chip storage with hydraulic walking floor
- 3) Sieve and pre-decoction / mill
- 4) drying plant
- 5) dry storage / silo
- 6) water inject plant
- 7) mixing plant
- 8a) Amandus Kahl Pellet press capacity 2 ton/hour
- 8b) Amandus Kahl Pellet press capacity 1 ton/hour
- 9) Cooling system
- 10) finished goods plant
- 11) Pallet winding system
- 12) GreCon fire protection system
Location: EUROPE
Add to Cart
View Details
Pellet Plant, 100 to 400 kg/hour
Stock #RG9478
Used pellet plant made between 1982 and 1985. Capacity is approximately 100 kg/hour (wood pellets) to 400 kg/hour (animal feed pellets) depending on compression ratio and pellet size. Plant includes the following equipment:
- CPM Master 30 kW pellet mill.
- Feed screw.
- Conditioning screw.
- Infeed hopper.
- 11 kW hammer mill, 600 kg/hour.
- 7m bucket elevator.
- CPM cooler to suit the mill.
- 3.4m belt conveyor.
- Shaker sizing table for fines.
- Electrical panel with controls and cables
Location: South Africa
Add to Cart
View Details
Used paper mill with the capacity 230 tones per day, raw materials waste paper and cellulose
Stock #AG61928
Used paper mill with the capacity 81 000 tones/year (230 tones/day). The plant is designed to operate on the waste paper and cellulose, before shutdown in 2017, plant operated on the wastepaper and produced Fluting, Testliner, Topkraft. Main equipment of the plant:
(2) complete stock preparation lines
Used paper machine by Erwepa, width 2500mm, Grammage 90-200 gr/m2, Speed 600m/min, Capacity 230 TPD
(3) press section by Jumbo Beloit
(44) drying cylinders, 6 bars, 1500mm in diameter
Rewinder by Jagenberg
Coal steam Boiler
Water treatment system
Transformers
More information on request
Location: Europe
Add to Cart
View Details
Used electronic grade polysilicon production plant with the capacity 150 ton per month
Stock #AS61951
Used polysilicon production plant with the capacity 150 ton per month of the electronic grade polysilicon. Main product of the plant is polysilicon chunks, but plant is equipped with several silicon core growing furnaces to produce small silicon rods (used to produce large polysilicon rods) and monocrystalline silicon ingots. The technological process of the plant is a traditional polysilicon production process, a reaction of metallurgical grade silicon with hydrogen chloride and nitrogen, to produce trichlorosilane (SiHCl3), this trichlorosilane is then purified and passed into large chemical vapor deposition reactors, where it is precipitates on the small silicon rod to form high purity polysilicon in the form of large rods. The large rods are then broken into chunks of specific sizes, processed, packaged in clean rooms, and shipped to the customers. Polycrystalline silicon and monocrystalline silicon mainly used as a raw material for the electronics production industry (as semiconductor), or for the solar industry (to produce photovoltaic panels). Main equipment of the plant produced by European and US manufacturers. More information on request.
Location: Europe
Add to Cart
View Details
Used Coke Oven, Pig Iron and Steelshop Production Plants
Stock #RG9334
Used coke oven, pig iron and steelshop production plants that were shut down in 2014. Formerly used to produce special and quality steels for use in autombiles, wire rods for cables, bolts, steel cord, springs, welding and rails.
Location: Europe
Add to Cart
View Details
Steffen Hartmann KBO Vacuum Evaporation Plant
Stock #RG8682
Used Steffen Hartmann KBO vacuum evaporation plant including:
- 3 stage vacuum evaporation system VV75 KDB
- down-flow evaporator Condest 13 K-Niro
reportedly made in 2008, shut down in 2012, currently dismantled and in storage. Plant previously used for a polyethylene glycol (peg) and water mixture. Further details on request.
Location: Europe
Add to Cart
View Details
Solar PV Modules Plant, 130 MW/year
Stock #RG9604
Used plant for production of PV (Photovoltaic) solar modules, built in 2017, first run in May 2018 and currently still in use. Capacity approximately 130 MW/year of modules.
Processes the following raw materials to make PV solar modules:- Polycrstalline - monocrystalline cells, ribbons, anti-reflective coated glass, EVA foil, backsheet film, aluminium frame, etc.
Major equipment includes:- Foil cutter, stringer and layup system, automatic soldering machine, automatic EVA and backsheet placement machine, EL tester, laminator, LED tester - sun simulator.
Location: Europe
Add to Cart
View Details
Slurry Plant to Mix / Dose Powder and Liquid
Stock #RG9720
Used slurry plant designed to mix & dose liquid with powder, shut down in 2011. Previously used to mix silicon carbide (SiC) with liquid polyethylene glycol (PEG).
Plant includes the following major equipment:
- (1) Mixer made from stainless steel 304 with capacity 20,000 litres.
- (3) Mixers made from stainless steel 304 with capacity 6,000 litres each.
- (3) Mixers made from stainless steel 304 with capacity 1,300 litres each.
- (3) Dosing units made from stainless steel 304 with capacity 2,000 kg/hour.
- Auxiliary equipment that includes hydrometers, rigid balances, drainage pumps, etc.
More equipment information available on request.
Location: Europe
Add to Cart
View Details
Pellet Plant, 500-700 kg/hour
Stock #RG9107
Unused and never installed pellet plant made by Gemco machinery in 2015 with capacity 500-700 kg/hour. Can be used to produce wood pellets or animal feed pellets. Major equipment includes:
- crusher, hammer Mill, dryer, pellet Mill, pellet press, cooler, packing machine.
Equipment includes warranty. Installation and commissioning can be arranged for additional payment.
More information available on request.
Location: Asia
Add to Cart
View Details
Pellet Plant, 5 tons/hour, Sprout Waldron
Stock #RG9521
Used animal feed pellet plant with capacity approximately 5 tons per hour. Equipment includes
- Sprout Waldron 26/300 110kW pellet mill. Designed to process 5 to 7 tons per hour of feedstock depending on die hole size and compression ratio of pellets.
- Sprout Waldron 50 kW hammer mill.
- Intake hopper, feed screws and conveyors.
- Main feed hopper (before pellet mill).
- Pellet cooler.
- Bagging station.
Location: Africa
Add to Cart
View Details
Pellet Line from Straw/Sawdust
Stock #UG6228
Second hand pellet production line from straw and sawdust. Output up to 1200 tons per month on straw. The whole line consists of the following equipment:
1) Packing machine into bags with weighscale
2) Belt conveyor for pellet collection
3) Screen
4) Bucket conveyor
5) Cooling radiator + blowers and cyclones
6) Bucket conveyor for cooling radiator
7) Two (2) pellet mills 508/12 with power 132 kW, Chinese made
8) Conditioners
9) Buffer tank with capacity 6 m3 equipped with cyclones and rotary valves
10) Hammer mill with power 132 kW
11) Straw shredder
12) Aspirator filter
13) Blowers
14) Drum dryer with length 21 m equipped with boiler coal and woodchips fired and additional sawdust burner
15) Buffer tank
16) Drum sifter for sawdust
17) Screw conveyor for dry product collection, cyclone, lock valve
18) Blowers
19) Chimney
20) Control panels
21) Condenser package
22) Dies
23) Roll jackets
Location: Poland
Add to Cart
View Details
Metal Shredder Line, 3-5 Tons/Hr Foundry Scrap, 2-4 Tons/Hr Flexible Scrap
Stock #RG8451
Used aluminium crusher driven by 240 kW, 400 volt, 50 herz, 900 rpm motor. Made by MYLLYOJAN Metalia OY (Finland) in 1995. Includes acoustic hood and belt feed conveyor.
- reportedly capable of processing: steel scrap, aluminium scrap, White scrap, Tecommunication scrap, electric and electronic scrap, wood and wooden products.
- approximate capacities: 3-5 tons per hour for foundry scrap, 2-4 tons per hour for plastic / flexible scrap
- maximum measurements of scrap for processing: 500 mm X 500 mm, max length 700 mm and max thickness 150 mm
- feed inlet measures 1200 mm X 700 mm
- ring rollers (4)
- crushing rings (40)
- grating: 5 pieces
- grill holes measure 25 mm X 110 mm
- hydraulic clutch: Voith EPK 750 TV
currently dismantled.
Location: EUROPE
Add to Cart
View Details
Lighting Poligonal Metallic Poles Production Line By OMM
Stock #KG61926
Used lighting poligonal metallic poles production line made by OMM (Italy) in 2014, consisting of follows:
- Workpieces feeding and automatic unloading system L12, includes workpieces accumulating table, gantry feed unit, workpieces centering station, (2) units of fold line marking system, (2) cameras of observing system, block for leveling workpieces and 5 + 5 blocks for lifting poles,
- Poles feeding section to welding, includes overhead crane, chaine transporter with saddles, live rolls.
- Automatic welding station L12 for single or double-seam poles diameter min.70-190 mm up to 1250 mm, includes ESAB AristoMig U500 automatic welding machine, transfer system, HS-system for straightening of single-seam poles.
- Metal-folding section includes (4) folding hydraulic press in-line, tables, semi-automatic positioning system, pole pusher, control panel.
The line uses workpieces trapezoid shape, but cutting machine for preparation of workpieces not available.
Location: ASIA
Add to Cart
View Details
Industrial Water Production Plant
Stock #KS61703
Used Industrial Water Production Plant rated currently 13.5 Million litres per day. Using method of microfiltration membrane MF which removes of floating substance, colloidal bacterial, viruses, etc., and Reverse osmosis filtration RO which removes of metal ions, chlorine ions. MF membrane: Cross flow type, turbidity after MF process: below 0.01 degree. Desalination rate after RO process: mean 98%. Electric conductivity after RO process: from 200mS/m to mean 4mS/m. Made by Shinnku in 2010. More info upon request.
Location: ASIA
Add to Cart
View Details
High Frequency Lamella Gluing Line
Stock #RG8673
Used high frequency Lamella gluing line consisting of high frequency press with 45 kW hf generator, milling machine for edge trimming, stacking, handling, and conveying systems. Suitable for Lamellas with following dimenisions: width 45 - 160 mm, thickness 4.2 - 9 mm, length 500 - 3100 mm. Can be used with all types of pinewood and hardwood. Cycle time is 14 - 20 seconds depending on the kind of wook and amount of glue needed. Depending on width of Lamellas 1 to 3 gaps can be glued at once. Process description available on demand.
Location: Europe
Add to Cart
View Details
Corrugated Board Boxes Production Plant, 10,000 M2/Month
Stock #KG60956
Used corrugated board boxes production plant rated 10.000 SQM monthly. Raw material is Kraft paper in reels width 2,000mm.
Consisting of:
a. Glue preparation shop,
B. Transpack 3-layer corrugated board production line rated 100M/min
C. Corrugated boxes Manufacturing line rated 20312 TPY by final production.
Location: EUROPE
Add to Cart
View Details
Candle Production Plant, 1200 Units/Hr
Stock #RG7092
Used plant for candle production suitable for production of parafin/stearin candles. Also suitable for multi coloured candles with different moulding boxes. Plant operates continuously and has a working capacity of approximately 1200 units per hour. Candle dimensions 21mm (D) X 300mm (L). Maximum production capacity approximately 1872 candles per hour with a minimum cycle time of 23 seconds per moulding box with 12 candles. Heating up temperature 70-120 DEGC. Includes Siemens S5 control panel.
Location: EUROPE
Add to Cart
View Details
Average 1000 Kg/Hr Wooden Sawdust Briquette Plant
Stock #KG61776
Used average 1000 kg per hour wooden sawdust briquette plant includes the following:
- (1) CRSI type Alfa 700 (Italy) sawdust drum dryer and heat generator rated 1300 kg/hour,
- (1) Adelman press-briquetter (Germany) rated 600 kg/hour,
- all necessary cyclones, bunkers, conveyors.
Automated process. Equipment new 2007. The capacity could be increased by involving additional presses.
Location: EU
Add to Cart
View Details
Automated Rack And Barrel Zinc Electroplating Line
Stock #RG8742
Used zinc electroplating plant for rack and barrel. Reportedly built by EKSAS Surface Technology in 2006, shut down in 2013 and currently being maintained. Capacity was approximately 8000 kg of steel parts per 8 hour shift.
- Plant is fully automated with (2) carriers, PLC control, (23) polypropylene tanks measuring (L)3.2M X (H)1.5M X (W)0.6/0.8M), (3) zinc plating tanks, DEGREASING, NEUTRALISING and (2) PASSIVATION tanks, (10) flight bars (6 with double barrels, 4 with jigs for rack plating), dryer and steel construction for loading/unloading.
- Waste water treatment plant is also available with (2) reactors for cyanide oxidation & CHROMATE reduction, filter press, carbon filter, POLYELECTROLYTE addition tank, tank with Lamella at bottom for sludge formation and evaporator with capacity 8000 LPD.
Location: Europe
Add to Cart
View Details
Aluminium Profile Extrusion Line, 150 Tons/Month
Stock #RG9057
Used aluminium profile extrusion line made in 2000 and still in operation. Reported to have capacity of approximately 150 tons/month. Equipment is Turkish made and produces aluminium profiles. Major equipment includes:
- press: 1100 ton, diameter 140, main cylinder 600 mm, side arms 280mm, housing 142 mm.
- shear dimensions: 110 X 130.
- pump motors: (1) 110 kW, (2) 30 kW.
- hydraulic pumps: (1) 125 litres, (2) 115 litres.
Quotes will be sent for (1) line, but there are (2) lines available.
Location: EUROPE
Add to Cart
View Details
Used Solar Polysilicon Manufacturing Plant with the capacity 7000 ton per year
Stock #KS61702
Used Solar Polysilicon Manufacturing Plant with the capacity 7000 ton per year which equal 1400MW per year. Product - Polysilicon chunks purity 99.9999%. Type: TCS-Simens type. Plant comissioning in 2011 and stopped in 2013. More details upon request.
Location: ASIA
Add to Cart
View Details
30 Tons Per Day Plate Ice Plant
Stock #RG8727
Used plate ice plant made by Finsam in 1992. Approximate capacity is 30 tons in 24 hours at 15 degrees Celsius water feed temperature. Possibility of doubling capacity to 60 tons in 24 hours. Evaporating temperature is -18 degrees Celsius. Plant includes Sabroe cooling compressor, pumps, storage and conveyor system indluding weighing and transport system with blower, cooling tower, steering and control panel with Allen Bradley PLC.
Location: Europe
Add to Cart
View Details
1400 KG per hour Briquette Production Line
Stock #RG9266
Used briquette production plant consisting of (2) independent lines with total capacity approximately 1400 kg/hour. Plant was installed into current location from used equipment in 2006. Currently still in use and producing 1000 kg/hour of briquettes from sawdust and wood waste. Major equipment includes:
- Pawert briquette press with approximate capacity 900 to 1000 kg/hour driven by 50 kW motor. Machine was made in 1967 but rebuilt by Pawert in 1986 and 2006. 10,000 hours of use since last refurbished in 2006.
- Pawert briquette press with approximate capacity 450 kg/hour driven by 35 kW motor. Machine was fully restored in 2000 and has only had 4000 hours of use since REFURB.
- (2) cooling lines measuring 30 M and 15 M length.
- (2) feed silos with extractors and variable drive motors.
- grain silage augers and hopper to feed above silo.
- Walthambury Series 2000 automatic Weigher / bagger machine.
- Morray M220 bagging machine.
- shrink wrapper.
Also available separately for additional payment:
- Weidemann 1490 front loader made in 2003.
- Christy turner high speed hammer Mill and dust extractor unit.
Quotes will be issued for the plant including both lines, but the 450 kg/hour line is also available separately. Contact us for more information.
Location: United Kingdom
Add to Cart
View Details
Pellet Plant, 1 ton/hour from Wood
Stock #ZG62436
Used complete 1 ton/hour wood pellet plant consisting of the following:
Mixing feed bin with Gaylord dumper:
5' X 6' X 4' stainless steel bin with 6" diameter discharge bottom feed screw and (3) internal rotating paddle bar delumper. Both feed screw and delumper have their own VFD drives connected to the operator terminal. There is also a new hydraulic ram control for the Gaylord dumper maechanism having operated less than 50 times.
Pellet feeder conveying line:
From the dumper bin, there is an 18' long conveyor which takes mash product to the top of the pellet mill with (3) separate magnet traps. The conveyor feeds to small 2' X 2' surge bin mounted to an airlock at its base.
Conditioner and pellet mill:
The 18 X 54 SD Sprout conditioner sit on top of the 501-HL Sprout pellet mill which has door force feeder. The mill isin excellent condition with all the bearings/seals recently replaced and a new 125 HP, 3 phase, 60 cycle, 460 volt, 150 amps main motor. Spare parts, such as extras sets of rolls and dies.
Hot pellet bucket elevator:
The hot pellet elevator is 16" X 20" X 22' tall.
Cooler:
Sprout model 9-275 vertical cooler couple with a 42" fan and 30 HP motor.
Screener:
No make on the screener tumbler type. Has secondary air draw from the cooler fan to eliminate dust.
Pellet silor for finish product:
8' X 8' X 20' galvanized pellet silo for finished product.
Electrical controls and starters:
All 3 phase, 60 cycle, 460 volt controls and starters are included.
Location: N/A
Add to Cart
View Details
Rebuilt Pellet Plant 3 Ton/Hour
Stock #ZS61625
Rebuilt 3 Ton/hrs Complete Pellet Plant consisting of following machinery and parts:
- 300 HP Electrical Starter. (New)
- 300 HP Sprout/Koppers SW26 Pellet Mill. (Rebuilt with New Parts.)
- Force Feeder and Conditioner attached for above.
- Hytrol white Conveyor S/N560030, PM output.
- 40 HP Blower (color white) and associated Ductwork installed for Heat.
- Motor Starter Control Panel #1. (New)
- Rapat model 3516 F Conveyor. (Used but works excellent)
- 200HP Hammer Mill Champion Model 4420. with new hammers,
New Ductwork and New Air transitions.
- 300HP Electrical Starter. (New)
- Electrical Panel attached to Cooler/Shaker. (New)
- Hammer Mill 15HP Blower for 2nd C5/C10 Cyclone, and Stand. (New)
- Spare Sprout 26” Pellet Mill Die. (New)
- Green Baghouse/Dust Collector. (Used, never installed it on our line.)
- Concrete Pedestal # 1 (For Pellet Mill and white 40HP Blower). (New)
- Hytrol Conveyor S/N 560028, and 1 other White colored conveyor.
- 1 Flat Concrete Pedestal #3 for Motor Starter Control Panel #1. (New)
- Concrete Pedestal # 2 for Pellet Mill Platform. (New)
- Miscellaneous equipment, some power wiring, cords and plugs. (New)
- 6 Step Gray/Blue portable stairs w/platform. (Used)
- 4 Step Green/Yellow heavy duty ladder/stairs. (Used)
- “Sound proof” hearing test booth.
- Airlock and Metal receiver box for Hammermill 2nd C5/C10 Cyclone.
- Ductwork. (New)
- Tan Cyclone and stand. (New)
- 4,000 lb. Rol-lift Scissor lift table. (Used)
- CPM Conditioner (white). (Used)
- Mac Airlock 16”X12”, 1-1/2 HP. (Used)
- Green cyclone and Airlock. (Used)
- Cooler CME C5 and associated airlock. (New)
- Cyclone w/15Hp Blower, associated Ductwork for C5 Air system. (New)
- Shaker Screen mounted on C5 Cooler. (New)
Location: USA
Add to Cart
View Details