Ribbon Mixers Europe


Ribbon Mixers Europe - Czech & Slovakia

Horizontal twin ribbon blender 160 Ltr

Horizontal twin ribbon blender 160 Ltr

Stock #H4069-1

Used stainless steel horizontal twin ribbon blender made by SPP (Slovak Republic) model M-160 with total volume of mixing chamber approximately 200 L, working volume approximately 160 L, mixing chamber has internal dimensions: 660 mm width x 725 mm length x 500 mm depth. Blender has two shafts with mixing ribbons, each with diameter 320 mm. Each shaft is driven by EL. Engine 2,2 kW, 220/380 V, 700 rpm, 50 HZ(total 4,4 kW). Machine has discharge outlet at the front with manually operated lid. Machine is mounted on carbon steel frame and is equipped with local control panel. Technical documentation is included.

Location: EU

Add to Cart View Details

400 Litre Menki Stainless Steel Twin Shaft Blender

400 Litre Menki Stainless Steel Twin Shaft Blender

Stock #H3826-2

Used Menki model MW 125 stainless steel twin shaft hammer mixer. Approximately 400 litre total capacity and approximately 320 litre working capacity. Mixing chamber has inside dimensions 735 mm width x 940 mm lenght x 685 mm height. Blender has two shafts with diameter 420 mm each belt driven via gearbox by EL. Motor 7,5 kW, 1470 rpm. Machine has discharge outlet on the bottom with dimensions 780 mm x 180 mm. Mounted on carbon steel frame.

Location: Perry Czech Warehouse

Add to Cart View Details

1000 Litre Kreber B.V. Stainless Steel Ribbon Blender

1000 Litre Kreber B.V. Stainless Steel Ribbon Blender

Stock #HG62273

Used Machinefabriek Kreber B.V., Holland model MIXER TYPE C approximately 1000 litre working capacity and 1200 litre total capacity stainless steel steel ribbon blender. Has approximately 960mm wide x 1380mm long x 1000mm deep mixing trough. Mixing trough has mild steel jacket rated atmospheric pressure. Stainless steel interrupted ribbon direct driven by 12.5 kw, 400 volt 3/50 AEG motor through Vector gearbox. Includes stainless steel hinged grid with spray bar and also additional hinged solid lid. Has pneumatically operated round bottom discharge approx. dimeter 300 mm and also equipped by electrical mechanism for tilt discharge. Mounted on carbon steel frame. Includes el. switchboard.

Location: CZ

Add to Cart View Details

Ribbon Mixers Europe - Europe

Used 3,000 Litre Werkstatten Stainless Steel Ribbon Blender

Used 3,000 Litre Werkstatten Stainless Steel Ribbon Blender

Stock #RG9790

Used 3,000 litre stainless steel ribbon blender type manufactured by Werkstatten GmbH Nordhorn. Trough measures approximately 1400mm diameter x 2800mm. Inlet diameter 500mm. Outlet diameter 200mm. With adjustable packing glands. Driven by a 13.5 kW, 380 Volt motor.

Location: Europe

Add to Cart View Details

Used 3,000 Litre Stainless Steel Corneloup SA Ribbon Blender

Used 3,000 Litre Stainless Steel Corneloup SA Ribbon Blender

Stock #RG9792

Used 3,000 litre 1.4306 (304L) stainless steel Ribbon Blender manufactured by Corneloup S.A. Lozanne. Trough measures 3100mm x 1200mm x 1400mm. Unit has a cover. Inlet diameters 400mm, 300mm & 150mm. Manway measures 530mm x 400mm. Outlet diameter 300mm. Unit has an interrupted ribbon. Unit is jacketed. Rated 2,5 bar working pressure. Glands are air purged. Driven by a 7.5 kW, 380/660 Volt (Ex) motor. Mixing shaft speed approximately 10 rpm.

Location: Europe

Add to Cart View Details

Used 2,500 Litre Stainless Steel Peha Ribbon Blender

Used 2,500 Litre Stainless Steel Peha Ribbon Blender

Stock #RG9791

Used 2500 litre stainless steel ribbon blender manufactured by Peha, type TM-2500. Trough measures 1200mm diameter x 1900mm. Inlet diameter 400mm. Manway. Outlet diameter 200mm. Unit is jacketed. Driven by a 18kW motor and mounted on a frame.

Location: EUROPE

Add to Cart View Details

100 Litre Babcock Gardner Type 100L Stainless Steel Ribbon Blender

100 Litre Babcock Gardner Type 100L Stainless Steel Ribbon Blender

Stock #L1405-02

Used Babcock Gardner Type 100L stainless steel ribbon blender. 100 litre working capacity. Mixing trough approximately 350mm wide x 500mm deep x 1000mm long. Single interrupted ribbon direct driven by a 1.5 kw 415 volt 3/50 1420 rpm motor through a David Brown GHT 2 gearbox with a ratio of 20.34/1 and an output RPM of 71.3.

Location: Perry England Warehouse

Add to Cart View Details

100 Litre Winkworth Model GU100 Stainless Steel Jacketed Ribbon Blender

100 Litre Winkworth Model GU100 Stainless Steel Jacketed Ribbon Blender

Stock #L1393-01

Used Winkworth Model GU100 stainless steel jacketed ribbon blender. Approximately 100 litre working capacity and approximately 144 litre total capacity (Product Dependent). Mixing trough measures approximately 950mm long x 380mm wide x 450mm deep. Has stainless steel external jacket rated 3.5 bar design pressure at 250 deg.c. Has stainless steel single interrupted ribbon driven by 1.5kw, 1420rpm electric motor through Custom Power Transmissions type MO260/S16 gearbox rated 1.5kw with 25:1 ratio. Has stainless steel hinged lid. Includes off-centre bottom discharge but no valve fitted. Unit mounted on mobile base.

Location: Perry, Newton Aycliffe, UK

Add to Cart View Details

130 L Stainless Steel Paddle Mixer Hobart Type 4346 With Auger Discharge

130 L Stainless Steel Paddle Mixer Hobart Type 4346 With Auger Discharge

Stock #U2342

Used paddle mixer by Hobart (USA) type 4346 with total volume 130 l and working volume about 90 l. Mixing chamber has internal dimensions: W 590 mm x L 500 mm x D 520 mm. Mixer has single shaft with two welded paddles. Shaft is chain driven by el. motor 5.5 kW, 1425 rpm, 380 V, 3/50 Hz. Bottom discharge via screw. Shaft, paddles and screw are designed in non-corrosive steel, chamber is designed in stainless steel. Mixer has top mounted stainless steel lid. Machine is mounted on supporting frame and is equipped with local control panel. Included technical documentation.

Location: Perry Poland Warehouse

Add to Cart View Details

200 Litre Karl Schnell Model 740/750 Stainless Steel Twin Ribbon Blender

200 Litre Karl Schnell Model 740/750 Stainless Steel Twin Ribbon Blender

Stock #L1393-02

Used Karl Schnell model 740/750 stainless steel jacketed twin ribbon blender. Approximately 200 litre capacity (Product Dependent). Mixing trough measures approximately 920mm long x 870mm wide x 600mm deep. Has stainless steel jacket on bottiom section of mixing trough. Has twin stainless steel uninterupted ribbon each driven by 1.8kw eletcric motor. Unit has stainless steel hinged lid with pneumatic open/close system. Unit has (2) end discharge ports but no valves fitted.

Location: Perry, Newton Aycliffe, UK

Add to Cart View Details

200 Litre Stainless Steel Vertical Ribbon Blender, New

200 Litre Stainless Steel Vertical Ribbon Blender, New

Stock #RG9140

Little used model 200-VLMR stainless steel vertical ribbon blender. 200 litre (300kg) batch capacity. Has 5.5 kw motor with frequency controlled drive. Mixing screw is cantilevered. 200mm diameter discharge but no valve.

Location: THE NETHERLANDS

Add to Cart View Details

200 Litre Stainless Steel Twin Shaft Paddle Mixer

200 Litre Stainless Steel Twin Shaft Paddle Mixer

Stock #U2151-2

Used stainless steel twin shaft paddle mixer with working volume 200 l. Unit has bottom discharge "bomb door" type. Driven by electric motor 3 kW with gearboxes. Shafts length 1200 mm, working diameter 360 mm. Mounted on integrated carbon steel frame. Shipping dimensions: length 2600 mm, width 700 mm, height 1200 mm. No technical documentation, nor nameplate.

Location: Perry Poland Warehouse

Add to Cart View Details

200 Litre Stainless Steel Paddle Mixer

200 Litre Stainless Steel Paddle Mixer

Stock #U1736-2

Used stainless steel paddle mixer with total volume 200 litres. Machine has heating coil. Feeding inlet located at top of mixer and has diameter 300 mm. Discharge by bottom side by 300 mm diameter valve.

Location: Perry Poland Warehouse

Add to Cart View Details

250 l Carbon Steel Paddle type Powder Mixer

250 l Carbon Steel Paddle type Powder Mixer

Stock #U2317-2

Used carbon steel paddle type powder mixer. Mixer has total volume about 360 l and working volume up to 250 l. Internal mixing chamber has dimensions: W 590 mm x L 1380 mm x D 540 mm. Machine has single shaft with bolted 4 bars. Each bar has welded 7 padles. Shaft is driven by el motor 4 kW, 380 V, 50 hz and gearbox. Working rotation of shaft up to 153 rpm. Top feeding, central bottom discharge with valve. Mixer is mounted on carbon steel frame. Top cover bolted. Last time used on animal feed production.

Location: PL

Add to Cart View Details

300 Litre Winkworth Model UT300 Stainless Steel Ribbon Blender

300 Litre Winkworth Model UT300 Stainless Steel Ribbon Blender

Stock #L1398-01

Used Winkworth Model UT300 stainless steel ribbon blender. Approximately 300 litre working capacity (Product Dependent). Mixing trough measures approximately 1150mm long x 575mm wide x 650mm deep. Has stainless steel single interrupted ribbon driven by 4kw, 1430rpm, 3 phase, 50hz electric motor through Custom Power Transmissions gearbox. Has stainless steel hinged lid. Includes off-centre bottom discharge but no valve fitted.

Location: Perry, Newton Aycliffe, UK

Add to Cart View Details

300 Litre Winkworth Model UT300 Stainless Steel Ribbon Blender

300 Litre Winkworth Model UT300 Stainless Steel Ribbon Blender

Stock #L1398-02

Used Winkworth Model UT300 stainless steel ribbon blender. Approximately 300 litre working capacity (Product Dependent). Mixing trough measures approximately 1150mm long x 575mm wide x 650mm deep. Has stainless steel single interrupted ribbon driven by 4kw, 1430rpm, 3 phase, 50hz electric motor through Custom Power Transmissions gearbox. Has stainless steel hinged lid. Includes off-centre bottom discharge but no valve fitted.

Location: Perry, Newton Aycliffe

Add to Cart View Details

400 Litre Babcock Gardner Stainless Steel Ribbon Blender

400 Litre Babcock Gardner Stainless Steel Ribbon Blender

Stock #L1396

Used Reconditioned Babcock Gardner Model 400L approximately 400 litre working capacity and 620 litre total capacity stainless steel ribbon blender. Has approximately 580mm wide x 1680mm long x 700mm deep mixing trough. Stainless steel interrupted ribbon direct driven by an approximately 5.5 kw, 415 volt 3/50 motor through a David Brown model GHT 642 gearbox rated 29.89/1 reduction ratio at 48.5 rpm. Includes stainless steel hinged lid. Cantilever design and mounted on stand.

Location: Perry England Warehouse

Add to Cart View Details

400 Litre William Tatham Model WT-400 Stainless Steel Twin Shaft Paddle Mixer

400 Litre William Tatham Model WT-400 Stainless Steel Twin Shaft Paddle Mixer

Stock #RG8765

Used William Tatham model WT-400 stainless steel twin shaft paddle mixer. Has 400 litre normal volume with approximately 160 litre minimum working volume and 560 litre maxiumum working volume. Mixing trough approximately 1055mm X 1200mm. Mixing shafts driven by 2 X 5.5 kW 415 volt 3/50 motors. Has 2 X 200mm X 800mm bomb door outlets.

Location: EU

Add to Cart View Details

430 Litre Winkworth Model GU430 Stainless Steel Ribbon Blender

430 Litre Winkworth Model GU430 Stainless Steel Ribbon Blender

Stock #L1381

Used Winkworth model GU430 stainless steel ribbon blender. Approximately 430 litre working capacity and 570 litre total capacity (Product Dependant). Cantilevered mixing trough measures approximately 1,500mm long x 600mm wide x 700mm deep. Single interrupted ribbon direct driven with electic motor/gearbox. Unit has counter-balanced hinged lid. Bottom discharge but no valve fitted.

Location: Perry England Warehouse

Add to Cart View Details

450 Litre Winkworth Model GU22 Stainless Steel Ribbon Blender

450 Litre Winkworth Model GU22 Stainless Steel Ribbon Blender

Stock #L1401

Used Winkworth model GU22 stainless steel ribbon blender. Approximately 450 litre working capacity and 660 litre total capacity. Cantilevered mixing trough approximately 570mm wide X 685mm deep X 1750mm long. Single interrupted ribbon direct driven by approximately 5 HP 415 volt 3/50 variable speed motor. Has bottom outlet with MUCON iris valve mounted on cantilevered base supplying approximately 1200mm discharge height. Also has hinged lid. Includes local control panel.

Location: Perry England Warehouse

Add to Cart View Details

500 l working volume second hand twin ribbons stainless steel powder mixer Lalesse B.V.

500 l working volume second hand twin ribbons stainless steel powder mixer Lalesse B.V.

Stock #U806V-10

Second hand, twin ribbons stainless steel powder mixer by Lalesse B.V. (Netherlands). Working volume 500 l. Mixing chamber has internal dimensions: L 2010 mm x W 800 mm x D 490 mm. Mixer has two mixing shafts, each equipped with welded ribbon and driven by el motor 4 kW, 1435 rpm, 230/400 V, 50 hz and reducer with i ratio = 13.21. Working rotation of each shaft up to 108,6 rpm. Each shaft is mounted in their mixing through. Bottom discharge outlet is equipped with manually operated valve and is located in the middle of the length of mixing chamber and only in one of the throughs. Top of the mixer is equipped with manually operated stainless steel covers bolted to machine. Mixer is also equipped with side walls, stainless steel pipes with nozzles for feeding liquid inside mixing product. Machine is mounted on 4 stainless steel legs with wheels and is equipped with local control panel. Last time used in food industry.

Location: PL

Add to Cart View Details

500 l Stainless Steel Twin Shaft Paddle Type Continous Work Mixer

500 l Stainless Steel Twin Shaft Paddle Type Continous Work Mixer

Stock #U2319-1

Used stainless steel twin shaft, paddle type mixer for continous work by Eko-Celkon (PL) type M0-02 with total volume 780 l and working volume 500 l. Mixing chamber has internal dimensions W 865 mm x D 500 mm x L 1800 mm. Mixer has two shafts, each driven by gearbox and el. motor 2.2 kW, 1420 rpm, 220/380 V, 50 hz. Working rotation of each shaft is up to 23.6 rpm. Each shaft has bolted 8 two side paddles. Feeding inlet has diameter 120 mm. Outlet has diameter 25 mm but can be easily upgraded to 240 mm x 480 mm. All contact parts designed in stainless steel. Machine is mounted on four stainless steel legs. Shipping dimensions: L 250 cm x W 130 cm x H 170 cm x W 700 kg

Location: PL

Add to Cart View Details

500 Litre Werner &  Pfleiderer Ribbon Mixer

500 Litre Werner & Pfleiderer Ribbon Mixer

Stock #U2194-2

Used ribbon mixer by Werner & Pfleiderer (Germany) with total volume 500 l and working volume about 350-370l. Contact parts designed in stainless steel. Mixer has mixing chamber with dimensions: width 660 mm x length 109,5 cm x depth 70 cm. Mixing chamber has carbon steel jacket. Central bottom discharge outlet without the valve. Mixer is mounted on two carbon steel supports. Top lid is designed in stainless steel, is bolted and manually half-opened. There are two top connections each with diameter 150 mm. Ribbon is driven by two toothed wheels and shaft. Missing EL. Motor with pulleys. Shipping dimensions: length 188 cm x width 90 cm x height 150 cm. No technical documentation included.

Location: PL

Add to Cart View Details

600 l stainless steel twin shaft paddle powder mixer by Kates

600 l stainless steel twin shaft paddle powder mixer by Kates

Stock #U2303

Little used stainless steel powder mixer by Kates (PL) type 1M0,6 with working volume 600 l. Mixer has two mixing shafts with welded paddles, chain driven by el motor with power 11 kW and gearbox. Shafts are working counter-rotating, each with rotation up to 68 rpm. Mixer has also shaft with welded pins for delumping agglomerated product. Shaft is driven by el motor 0.75 kW and gearbox. Working rotation 169 rpm. Internal surface of mixing chamber is polished and designed in stainless steel 316L. Mixer has product discharge via pneumatically operated "bomb doors" into the conical stainless steel chute. Machine new 2012. Includes technical documentation. Shipping dimensions: mixer L 1925 mm x W 2105 mm x H 1831 mm x weight 1500 kg + chute: L 172 cm x W 127 cm x H 195 cm x weight approx 300 kg

Location: PL

Add to Cart View Details

650 l total volume stainless steel ribbon mixer

650 l total volume stainless steel ribbon mixer

Stock #U2270-4

Used stainless steel contact part ribbon mixer with total volume 650 l and working volume 450 l. Mixing chamber has internal dimensions: W 700 mm x L 1250 mm x D 830 mm. Mixer has single shaft with welded and bolted double ribbon, driven through two speed electric motor 15/10.5 kW, 1450/725 rpm, 380V, 50 hz and gearbox with reduction rate 14.74. Internal ribbon works in distance 160 mm from shaft. External ribbon works in distance 290 mm from the shaft. Top cover is equipped with feeding inlet with diameter 145 mm and is rised manually. Central bottom discharge outlet with diameter 150 mm. Valve operated manually. Mixer has also provision for mounting two intensive agitators (choppers) but choppers are not included. Mixer has local control panel. Machine is mounted on two carbon steel supports. Shipping dimensions: L 220 cm x W 115 cm x H 250 cm; weight below 1500 kg.

Location: PL

Add to Cart View Details

660 Liter Total Volume Stainless Steel Ribbon Blender

660 Liter Total Volume Stainless Steel Ribbon Blender

Stock #U806V-12

Second hand stainless steel contact parts ribbon blender with total volume 660 l and working volume 490 l. Mixer has mixing chamber with internal dimensions: W 610 mm x L 1676 mm x D 710 mm. Top open, covered with stainless steel lid. Mixer has stainless steel shaft with welded interrupted single ribbon, driven via gearbox and el. motor 2.9 kW, 1440 rpm, 400/440V, 50 hz. Working rotation of mixing shaft 40 rpm. Discharge outlet has dimensions 160 x 160 mm and is equipped with manually operated valve. Mixer is mounted on carbon steel supporting pedestal. Included carbon steel service platform with stairs. Last time used in food industry.

Location: PL

Add to Cart View Details

800 Litre Babcock Gardner Model 800H Stainless Steel Ribbon Blender, Used Refurbished

800 Litre Babcock Gardner Model 800H Stainless Steel Ribbon Blender, Used Refurbished

Stock #L1324-01

Used Refurbished Babcock Gardner Model 800H stainless steel horizontal ribbon blender. Approximately 800 litre working capacity and 1250 litre total capacity. Has approximately 770mm wide x 2300mm long x 800mm deep mixing trough. Stainless steel interrupted ribbon driven by an approximately 15 kw motor through a gearbox. Unit includes centre bottom manual discharge. Includes stainless steel lid.

Location: Perry England Warehouse

Add to Cart View Details

800 Litre Stainless Steel Ribbon Blender

800 Litre Stainless Steel Ribbon Blender

Stock #RG9468

Used approximately 800 litre 316 stainless steel ribbon blender. Motor 10 kw. Measures: Shaft diameter: 80mm, Length : 2300mm, width with motor: 1300mm, height 1800mm, shell thickness 4 mm

Location: EU

Add to Cart View Details

1,000 Litre Coprinox Model MX010 304 Stainless Steel Ribbon Blender

1,000 Litre Coprinox Model MX010 304 Stainless Steel Ribbon Blender

Stock #RG9377

New Coprinox model MX010 304 stainless steel ribbon blender with total capacity 1,000 litres, working capacity 500-700 litres. Driven by 5,5 Kw motor. Includes loading screw conveyor, pneumatic plug valve and small stainless steel filter on top nozzle.

Location: EU

Add to Cart View Details

1,000 Litre Polish Made Stainless Steel Ribbon Blender

1,000 Litre Polish Made Stainless Steel Ribbon Blender

Stock #UG6192

New Polish made ribbon blender with working capacity 1000 l made of stainless steel with 304 grade. Mixer is settled on a stainless steel frame with 304 grade. The ribbon agitator is driven with electric motor 11 kW through a gearbox. Agitator working speed is variable up to 40 rpm. Top inlet with technological pipes located nearby. Central bottom outlet with manual rotary valve. Unit includes local control panel equipped with: emergency kill switch, main on/off switch, on/off agitator switches, +/- agitator speed switches, agitator speed digital gauge, current agitator load digital gauge and electric switchboard with frequency converter.

Location: Poland

Add to Cart View Details

1,000 Litre Stainless Steel Ribbon Blender

1,000 Litre Stainless Steel Ribbon Blender

Stock #RG9531

New approximately 1,000 litre capacity stainless steel ribbon blender. Stainless steel double ribbon driven by a 11 kW, 1460 rpm, 380 volt, 3/50 motor. Includes stainless steel hinged lid. Steps are included. Mounted on a mobile frame.

Location: UK

Add to Cart View Details

1,000 Litre Werner & Pfleiderer Type Simplex 18 WX BS Stainless Steel Ribbon Blender

1,000 Litre Werner & Pfleiderer Type Simplex 18 WX BS Stainless Steel Ribbon Blender

Stock #RG5800

Used Werner & Pfleiderer type simplex 18 WX BS stainless steel ribbon type blender for PVC compounding. Approximately 1000 litre working capacity and 1350 litre total capacity. Mixing trough measures approximately 1345mm long X 900mm wide X 900mm deep. Has stainless steel single interrupted ribbon driven by 15kW electric motor. Speed of blade is 41 rpm. Manual open and closing of cover. Does not include platform.

Location: GERMANY

Add to Cart View Details

1,200 Litre Gardner Stainless Steel Ribbon Blender

1,200 Litre Gardner Stainless Steel Ribbon Blender

Stock #RG9574

Used Gardner stainless steel ribbon blender. Approximately 1200 litre working capacity and 1845 litre total capacity. Mixing trough approximately 760mm wide x 2330mm long x 825mm deep. Single interrupted ribbon direct driven by 11 kW 415 volt 3/50 1450 rpm motor via Radicon gearbox at approximately 30-35 rpm. Has plummer block bearings and air purged seals. Has bolted flat cover with 500mm flanged connection and 500mm x 600mm access hatch with hinged lid. Includes 200mm diameter centre bottom discharge

Location: UK

Add to Cart View Details

1900 l Stainless Steel Ribbon Blender

1900 l Stainless Steel Ribbon Blender

Stock #U2328-1

Used stainless steel ribbon blender with total volume 1900 l and working volume about 1100 l. Mixing chamber has internal dimensions L 198 cm x W 80 cm x depth (length of straight side of wall) 74.5 cm. Top open, with welded safety bars. Mixer has shaft with double ribbon, which is driven by el. motor 11 kW, 1450 rpm, 380-415 V, 50 hz and gearbox. Discharge through outlet, located close to front wall. Discharge has dimensions: 240 mm x 210 mm and has manually operated valve. Mixer is mounted on stainless steel supporting frame. Shipping dimensions: L 2800 mm x W 1500 mm x H 2450 mm.

Location: Perry Poland Warehouse

Add to Cart View Details

2,000 Litre Winkworth Model FU42 Mild Steel Ribbon Blender

2,000 Litre Winkworth Model FU42 Mild Steel Ribbon Blender

Stock #L1382-01

Used Winkworth model FU42MS carbon steel ribbon blender. Approximartely 2,000 litre working capacity and 2,800 litre total capacity (Product Dependent). Mixing trough measures approximately 2400mm long x 1070mm wide x 1200mm high. Has mild steel single interrupted ribbon driven by 18.5kw, 1460rpm electirc motor through a greabox. Unit has hinged lid. Includes centre bottom discharge but no valve fitted. Unit is mounted on mild steel base.

Location: Perry England Warehouse

Add to Cart View Details

2,000 Litre Winkworth Model FU42 Mild Steel Ribbon Blender

2,000 Litre Winkworth Model FU42 Mild Steel Ribbon Blender

Stock #L1382-02

Used Winkworth model FU42MS carbon steel ribbon blender. Approximartely 2,000 litre working capacity and 2,800 litre total capacity (Product Dependent). Mixing trough measures approximately 2400mm long x 1070mm wide x 1200mm high. Has mild steel single interrupted ribbon driven by 18.5kw, 1460rpm electirc motor through a greabox. Unit has hinged lid. Includes centre bottom discharge but no valve fitted. Unit is mounted on mild steel base.

Location: Perry England Warehouse

Add to Cart View Details

2,500 Litre Kemutec Gardner Model 2500RH Hastelloy Jacketed Ribbon Blender Dryer

2,500 Litre Kemutec Gardner Model 2500RH Hastelloy Jacketed Ribbon Blender Dryer

Stock #L1157-01

Used Kemutec Gardner model 2500RH Hastelloy jacketed ribbon blender/dryer. 2500 litre working capacity and approximately 4200 litre total capacity. External jacket rated 2.97 bar at 133 degrees Celsius. Internally rated atmospheric pressure at 50 degrees Celsius. Mixing chamber approximately 1450mm wide X 1750mm deep X 3000mm long. Single interrupted ribbon belt driven by 15 kW 400 volt 3/50 1476 rpm motor through a David Brown Radicon gearbox ratio 80/1 with a 18 rpm output. Has flat bolted lid with manway. Also has center bottom outlet.

Location: Perry England Warehouse

Add to Cart View Details

2,500 Litre Carbon Steel Ribbon Blender

2,500 Litre Carbon Steel Ribbon Blender

Stock #L1260-02

Used approximately 2,500 litre carbon steel ribbon blender. Working capacity approximately 2,500 litre and total capacity approx 3,500 litre. Mixing trough approximately 3500mm long x 1700mm wide x 1800mm deep. Single ribbon direct driven by 17.5 kw 380-690 volt 965 rpm 3/50 motor through a Bonfigliolo gearbox with a ratio of 46.7.

Location: Perry England Warehouse

Add to Cart View Details

2600 Liter Total Volume Stainless Steel Contact Parts Ribbon Blender

2600 Liter Total Volume Stainless Steel Contact Parts Ribbon Blender

Stock #U2270-3

Used stainless steel contact parts ribbon mixer with total volume 2600 l and working volume about 1800 l. Mixing chamber has internal dimensions: W 925 mm x L 3145 mm x D 1000 mm. Mixer has single shaft with welded interrupted ribbon. Shaft is driven via Radicon gearbox and electric motor with power about 18 kW. Mixer has top bolted, with covers and central feeding inlet with diameter 200 mm. Central bottom discharge has dimensions: 200 mm x 250 mm and valve is operated pneumatically. Mixer is mounted on carbon steel integrated frame with drive. Shipping dimensions: W 120 cm x L 390 cm x H 250 cm. Last time used in food production.

Location: PL

Add to Cart View Details

2700 l continous work stainless steel paddle mixer Gloucester Material Handling Ltd

2700 l continous work stainless steel paddle mixer Gloucester Material Handling Ltd

Stock #U2284

Used stainless steel paddle mixer for continous work by Gloucester Material Handling Ltd (UK) with total volume 2700 l. Internal diameter of mixing chamber 1100 mm x 2840 mm length. Top feeding inlet has dimensions: 300 mm x 300 mm. Bottom front outlet has dimensions 300 mm x 440 mm. Mixer is equipped with stainless steel mixing shaft with welded 21 paddles. Front and back walls are bolted. Front wall is equipped with mechanical sealing of shaft. Back wall has standard sealing of shaft. Mixer had been running with electric motor 55 kW, 1500 rpm - but motor is not included. Mixer is equipped with gearbox and new mechanical sealing. No control panel included. Technical drawings of mixer and shaft are included. Mixer had been running in food production with reported output about 8-12 tons per hour. Machine is mounted on 6 stainless steel legs.

Location: PL

Add to Cart View Details

3,500 Litre Stainless Steel Ribbon Blender

3,500 Litre Stainless Steel Ribbon Blender

Stock #L1408

Used SS Fries (Den Holder) stainless steel ribbon blender. Approximately 3,850 litre working capacity & approximately 5,000 litre total capacity (product dependant). Has approximately 3,700mm long x 1,700mm wide x 1,900mm deep mixing trough. Has stainless steel single interrupted ribbon driven by approximately 37kw motor through Bonfiglioli gearbox. Has clamped lids. Unit is mounted in a mild steel frame.

Location: Newton Aycliffe, UK

Add to Cart View Details

4000 l Horizontal Stainless Steel Jacketed Mixer/Cooker By Zacmi

4000 l Horizontal Stainless Steel Jacketed Mixer/Cooker By Zacmi

Stock #U2322-1

Second hand stainless steel horizontal mixer/cooker by Zacmi (Italy) with total volume 4000 l. Working volume about 2800 l. Mixing chamber has internal dimensions: width 1255 mm x length 2755 mm x depth 1330 mm. Mixer has stainless steel jacket on side walls and bottom. Top cover bolted, equipped with hinged lids. Mixing shaft is equipped with four frame type agitators. Shaft is driven by el. motor 0,55 kW, 1360 rpm, 230/400 V, 50 hz and gearbox. Working rotation of agitator up to 10.91 rpm. Mixer has two discharge outlets - first at front wall, second at drive wall. Machine is mounted on four stainless steel legs. Shipping dimensions: width 1450 mm x length 3900 mm x height 2500 mm.

Location: Perry Poland Warehouse

Add to Cart View Details

5,400 Litre Stainless Steel Ribbon Blender

5,400 Litre Stainless Steel Ribbon Blender

Stock #L1365-02

Used Expert Industries stainless steel ribbon blender. Approximately 5,400 litre (190 cuft) working capacity and 6,650 litre (235 cuft) total capacity. Has approximately 1,372mm (54") wide x 3,658mm (12') long x 1,473mm (58") deep mixing trough. Stainless steel double ribbon belt driven by 30hp 415 volt 1465 rpm 3/50 motor via Dodge torque arm speed reducer rated 25.66/1 reduction ratio. Includes stainless steel hinged lid with Fike explosion protection unit. Mounted on legs.

Location: Perry England Warehouse

Add to Cart View Details

5,900 Litre Battaggion Stainless Steel Jacketed Ribbon Blender

5,900 Litre Battaggion Stainless Steel Jacketed Ribbon Blender

Stock #RG9576

Used Battaggion stainless steel jacketed ribbon blender. Mixing trough measures approximately 4450mm long x 1300mm wide x 1600mm deep giving approximately 5,900 litre working capacity and 8,500 litre total capacity depending om product. Has single stainless steel interrupted ribbon which is belt driven by 55kw, 380-420 volt, 3/50, 740rpm motor through Flender model SDN 320 gearbox rated 1485rpm input and 50.4 rpm output. Has 3 section hinged flat lid. Unit has centre bottom outlet.

Location: UK

Add to Cart View Details


Ribbon Mixers Europe - USA