10 - 20 HP Granulators


10 - 20 HP Granulators - Czech & Slovakia

10 - 20 HP Granulators - Europe

0.55 kW cutting mill Getecha type SRS 100

0.55 kW cutting mill Getecha type SRS 100

Stock #U2304-1

Used horizontal cutting mill by Getecha (Germany) type SRS 100 A2. Mill has feeding inlet with diameter 50 mm. Milling chamber is designed in stainless steel and has internal diameter 100 mm x length 100 mm. Rotor is designed in non-corrosive steel and has 4 knives and is driven by gearbox and electric motor 0.55 kW, 1375 rpm, 230-400 V, 50 hz. Working rotation of rotor up to 127 rpm. Mill has one static knife. Bottom discharge through screen. Outlet discharge has diameter 55 mm. Mill is mounted on mobile platform. Has start/stop control and stainless steel cover with sound insulation.

Location: PL

Add to Cart View Details

0.55 kW cutting mill Getecha type SRS 100

0.55 kW cutting mill Getecha type SRS 100

Stock #U2304-14

Used horizontal cutting mill by Getecha (Germany) type SRS 100 A1.10. Mill has two feeding inlets, each with diameter 40 mm. Milling chamber is designed in stainless steel and has internal diameter 100 mm x length 100 mm. Rotor is designed in non-corrosive steel and has 4 knives and is driven by gearbox and electric motor 0.55 kW, 1375 rpm, 230-400 V, 50 hz. Working rotation of rotor up to 127 rpm. Mill has one static knife. Bottom discharge through screen. Outlet discharge has diameter 55 mm. Mill is mounted on mobile platform. Has start/stop control and stainless steel cover with sound insulation.

Location: PL

Add to Cart View Details

5 HP 10

5 HP 10" X 5" Plastic Cutter

Stock #U2143-14

Used vertical plastic cutter polish made. Machine is driven by electric motor with power 4 kW, 1440 rpm, 50 Hz, 220/380V. Inlet dimensions: width 270 mm x 140 mm height. Milling chamber has a internal diameter 275 mm. Rotor has 3 knives. On milling chamber walls are mounted 3 static knives. Bottom side discharge. Dimensions: 800 mm x 400 mm x 950 mm.

Location: Perry Poland Warehouse

Add to Cart View Details

5 HP 10

5 HP 10" X 5" Plastic Cutter

Stock #U2094-3

Used vertical plastic cutter polish made. Machine is driven by electric motor with power 4 kW, 1440 rpm, 50 Hz, 220/380V. Inlet dimensions: width 270 mm x 140 mm height. Milling chamber has a internal diameter 275 mm. Rotor has 3 knives. On milling chamber walls are mounted 3 static knives. Bottom side discharge. Dimensions: 800x400x950 mm.

Location: Perry Poland Warehouse

Add to Cart View Details

5 HP 7

5 HP 7" X 10" Mecanofil Cutter

Stock #U2085-10

Used carbon steel cutter for plastics made by Mecanofil (Spain) with feeder screw conveyor. Screw feeder conveyor driven by 0,55 kW motor via bevel gearbox. Grinding chamber dimnesions: length 250 mm x diameter 170 mm. Has 2 static blades and screen perforation 6 mm. Rotor with 4 blades is driven by belt gearbox and elec. Motor 4 kW. Mounted on carbon steel frame. Includes control panel. Shipping dimensions: width 1200 mm x depth 1800 mm, height 1900 mm. No documentation. Weight: 720 kg. New 1999. No technical documentation.

Location: Perry Poland Warehouse

Add to Cart View Details

5.5 kW Horizontal Cutting Mill by Zerma Model GS300/200 with Blower and Cyclone

5.5 kW Horizontal Cutting Mill by Zerma Model GS300/200 with Blower and Cyclone

Stock #U2314-1

Used horizontal cutting mill by Zerma (Germany) model GS300/200. Mill has 3 knives on rotor and 3 knives on stator. Working width of rotor is 200 mm x internal diameter of milling chamber 315 mm. Rotor works with 725 rpm. Feeding inlet has dimensions 220 mm x 215 mm. Mill is driven by el. motor with power 5.5 kW. Mill is also equipped with blower driven by 1.5 kW motor, and cyclone. Shipping dimensions: L 1870 mm x W 1165 mm x H 1985 mm x weight 600 kg.

Location: PL

Add to Cart View Details

7 HP 8

7 HP 8" X 12" Kamas Industri AB Type K-Kyarn Cutting Mill

Stock #U2233-4

Used cutting mill by Kamas Industri AB (Sweden) type K-Kyarn, belt driven by electric motor 5.5 kW, 1425 rpm, 380 V, 50 hertz. Mill has inlet dimensions 210 mm x 310 mm. Central bottom discharge. Mill is equipped with feeding hopper. Machine is mounted on stainless steel mobile frame and is equipped with local control panel.

Location: PL

Add to Cart View Details

7.3 HP Dreher Type S 26/41 GFS-RS Granulator

7.3 HP Dreher Type S 26/41 GFS-RS Granulator

Stock #RG9497

Used Dreher type S 26/41 GFS-RS granulator. Rotor width 410mm, rotor diameter 260mm, open rotor, number of rotor knives: 3, number of stator knives: 2, with hopper, hinged top, motor 5,5 kW, 380 volt, with roll feeding, motor 0,75 kW, 220/380 volt, with variable speed drive, with fan, mounted in sound absorbing box, with switchgear.

Location: EU

Add to Cart View Details

7.5 kW Vertical Cutting Mill

7.5 kW Vertical Cutting Mill

Stock #U2314-2

Used vertical plastic cutter polish made. Machine is driven by electric motor with power 7.5 kW. Rotor has 3 knives. On milling chamber walls are mounted 3 static knives. Inlet dimensions: width 500 mm x 300 mm height. Bottom side discharge. Dimensions: 1150 x 700 x 1500 mm x weight 330 kg. Shipping dimensions L 150 cm x W 120 cm x H 80 cm.

Location: PL

Add to Cart View Details

10 HP 12

10 HP 12" X 7" Plastic Cutter

Stock #U2143-13

Used vertical plastic cutter polish made. Machine is driven by electric motor with power 7,5 kW. Inlet dimensions: width 300 mm x 180 mm height. Rotor has 3 knives. On milling chamber walls are mounted 4 static knives. Milling chamber dimensions: diameter 290 x height 120 mm. Bottom side discharge. Mounted on tripod. Dimensions: 900 mm x 700 mm x 1150 mm.

Location: Perry Poland Warehouse

Add to Cart View Details

14 HP Plastic Granulator

14 HP Plastic Granulator

Stock #AG60898-04

Used plastic granulator with a 2 fixed knives and 3 mobile knives at rotor. Diameter of rotor 320mm,and length of rotor 400mm. Rotation speed of rotor 550 rpm. Rotor is belt driven by approximately a 15 HP/11 kW motor. Loading throat 395 X 360mm. Approximate capacity 100-200 kg/hour depending on final fraction. New in 2008.

Location: UKRAINE

Add to Cart View Details

15 HP 12

15 HP 12" X 16" Pre-Crusher

Stock #U2143-9

Used vertical pre-crusher for plastics. Polish made. Machine has a milling chamber with internal diameter 500 mm. At the bottom of milling chamber there is a rotor with two blades. Rotor is belt driven by electric motor 11 kW, 1460 rpm, 380 V, 50 HZ. Top feeding inlet with dimensions 300 mm x 400 mm and bottom side discharge through the screen. Mounted on integrated pedestal.

Location: PL

Add to Cart View Details


10 - 20 HP Granulators - USA

1 HP Precision Air Conveyance Corp. Model 78FSP Inline Film Chopper

1 HP Precision Air Conveyance Corp. Model 78FSP Inline Film Chopper

Stock #ZP60836

Used Precision Air Conveyance Corp. Model 78FSP inline film chopper. S/N PQ-9534F. Equipped with 2 knife open rotor, 1 bed knife, 4" diameter inlet and outlet. 1 HP, 115/230/460 volt, 1725 rpm motor. Includes inlet muffler box and disconnect switch. Mounted on caster plate base.

Location: Midwest USA

Add to Cart View Details

5 HP 8

5 HP 8" X 10" Nelmor Model 810RGII Plastics Granulator

Stock #C9101J-004

Used Nelmor Granulator. Model 810RGII, Serial #23197. New 1985. Has an 8" X 10" throat opening with a 2-knife semi-open rotor. Rotor is belt driven by a 5 HP motor, 460/3/60. Unit is factory sound enclosed and is set up for veyor discharge. Hopper tilts open for quick clean out.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

5 HP 8

5 HP 8" X 10" Nelmor Model 810RGII Plastics Granulator

Stock #C9101J-003

Used Nelmor Granulator. Model 810RGII, Serial #23195. New 1985 Has an 8" X 10" throat opening with a 2-knife semi-open rotor. Rotor is belt driven by a 5 HP motor460/3/60. Unit is factory sound enclosed, and is set up for veyor discharge. Hopper tilts open for quick clean out. With motor starter.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

5 HP 8

5 HP 8" X 10" Nelmor Model 810RGII Plastics Granulator

Stock #C9101J-002

Used Nelmor Granulator. Model 810RGII, Serial #23190. New 1985. Has an 8" X 10" throat opening with a 2-knife semi-open rotor. Rotor is belt driven by a 5 HP motor, 460/3/60. Unit is factory sound enclosed and is set up for veyor discharge. Hopper tilts open for quick clean out. With motor starter.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

5 HP 8

5 HP 8" X 8" Polymer Systems Model HM-W88 Hot Melt Granulator

Stock #M2813J-006

Used Polymer Systems hot melt Granulator. Model HM-W88, Serial #HMGW881829. Has an 8" X 8" throat opening with a 2-knife open rotor. Granulator has a 2-1/2" X 8" top feed opening and a jacketed cutting chamber. Driven by a 5 HP motor, 460/3/60, 6.6 amps. Grinder is a low profile type mounted on casters and is set up for an air veyor discharge. Unit has approximately 5/16" screen, motor starters and operator controls.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

20 HP 12

20 HP 12" X 48" Ball & Jewell Model LT-1248 Granulator

Stock #ZP60555-2

Used Ball & Jewell Model LT-1248 Granulator with feed rolls. Has 12" X 48" feed throat opening with 3-knife open rotor and 2 bed knives. Driven by dual 10 HP motors, 230/460 volt, 1170 rpm. Has 7.5" X 47" feed rolls. Includes motor starter and granulator controls with interlocked 5 HP blower starter.

Location: Midwest USA

Add to Cart View Details