Miscellaneous Equipment for Food Processing


Miscellaneous Equipment for Food Processing - Czech & Slovakia

APPLIANCE FOR PRODUCING FLAVOR CARBONATED WATER 3

APPLIANCE FOR PRODUCING FLAVOR CARBONATED WATER 3

Stock #HG59673

German Production machine used for the production of carbonated water with flavor. The machine passed in 2011 after a total refurbishment and renovation of already been used. The maximum capacity is 1500 L / H the machine has two containers. In the first container, there is a carbonation carbonated water, carbonated water goes through the pump to a second tank and means adds flavor. The machine is equipped with a control system Siemens KTP 1000 and has a 10-inch touchscreen monitor.

Location: Central Europe

Add to Cart View Details

PM RYBNIK MIXTER 2500

PM RYBNIK MIXTER 2500

Stock #HG59657

Used machine PM Rybnik model Mixter 2500 production line equipped to perform basic functions such as mixing aroma in the cheese, homogenization, stabilization, thermozation. Machine dimensions are 2000 mm X 1400 mm X 1700 mm. Machine weight is 395 kg. (depending on equipment), power consumption of 13 kW (depending on the device), vapor pressure max. 0.05 MPA, steam consumption 80 kg / H, the volume of technological input is 125 kg, thermisation time is 12-14min.

Location: Central Europe

Add to Cart View Details

CEREX GRAIN PROCESSOR INCOMEC MODEL MARK 500

CEREX GRAIN PROCESSOR INCOMEC MODEL MARK 500

Stock #HG59601

Used Incoma Cerex grain processor machine model Mark 500. The Incomec-Cerex grain processor is a simple food processor which converts untreated grain, pellets and mixes of grain and/or pellets into a slice/cake/biscuit/cracker" in one operation without the need for further treatment. The grain is fed through a hopper, volumetrically metered and introduced by a feed-slide into the mold. The mold closes, crushing and baking the grain for a short period, after which a little opening is created to enable the expansion of the grain or pellet and thus forming the cake shape. Technical parameters: main voltage 3 X 380V/50HZ; 2,5kW, compressed air: from 3 to 5 bar, working cycle: 1 wholegrain bread / 12 S, usual productivity: 4000 pieces a Day (2 shifts).

Location: Central Europe

Add to Cart View Details

WIENER NIBROTOM MKII CS COCOA BLADE MILL

WIENER NIBROTOM MKII CS COCOA BLADE MILL

Stock #HG57466

Used Wiener Nibrotom MKII carbon steel blade Mill for cocoa beans. Batch capacity approx. 100 kg. Carbon steel blades driven by EL. Motor 3PH/400V/50HZ /55kW. Spare screens available.

Location: Central Europe

Add to Cart View Details

Dedy Hollow Figures Spiner

Dedy Hollow Figures Spiner

Stock #HG62261

Used Dedy hollow figures spinner. Spinner has (2) shafts with (4) arms, each arm has (3) magnets - total (24) magnets. Rotation of shafts 1 rpm, rotatrion of arms 2 rpm. Includes vibrating system for dispersion of chocolate and control panel. Electrical supply requirement 220 - 240 V, 50 Hz, 1 phase.

Location: Central Europe

Add to Cart View Details

Dedy Hollow Figures Spiner

Dedy Hollow Figures Spiner

Stock #HG62260

Used Dedy hollow figures spinner. Spinner has (2) shafts with (4) arms, each arm has (3) magnets - total (24) magnets. Rotation of shafts 1 rpm, rotatrion of arms 2 rpm. Includes vibrating system for dispersion of chocolate and control panel. Electrical supply requirement 220 - 240 V, 50 Hz, 1 phase.

Location: Central Europe

Add to Cart View Details

FPE Prima TMX70 Aearation Mixer - Foam Generator

FPE Prima TMX70 Aearation Mixer - Foam Generator

Stock #H4052-1

Used Food Processing Equipment S.r.l - FPE - PRIMA model TMX 70 stainless steel continuous areation mixer / aerator / foam generator. Has a jacketed (for cooling) mixing chamber inside diameter 220 mm x 320 mm length. Rotor dia. 220 x 300 mm length driven by Celma Indukta 15.0kW/400V/50Hz/1470rpm el. motor. Mounted on stainless steel frame with castors. Included some valves, bypass pipes and control panel. Approx. capacity 1000 litre/hour.

Location: EU

Add to Cart View Details

Hansa Eco-Mix continuous dynamic foam generator

Hansa Eco-Mix continuous dynamic foam generator

Stock #HG62170

Hansa Eco-Mix continuous dynamic foam generator, model Eco-mix, 304 stainless steel. Approximately 230mm diameter x 280 deep horizontal chamber with mixing pins. Driven by a 4 kw, 3/50/380 volt, 1420 rpm ELmotor. Unit includes a control panel with SIMATIC 0P27 Touch panel, filing pump Hansa Q=35-400 l/min. Transport dimension : 1,6 x 0,7m - 1,85m high.

Location: CZ

Add to Cart View Details

Treif Piccolo II, 130 1, Dicing and Cutting Machine

Treif Piccolo II, 130 1, Dicing and Cutting Machine

Stock #HG62058

Used TREIF piccolo II model 130 1 dicing and cutting machine. Size of cutting chamber 84x84x280 mm. Feeding cross section max. 86x280 mm. Max. Effective output 605 kg/h. Connected load 0,75 kW/380V/50HZ .

Location: Central Europe

Add to Cart View Details

Miscellaneous Equipment for Food Processing - Europe

FORMING MACHINE ITALPAST A/250

FORMING MACHINE ITALPAST A/250

Stock #KG56609

Used forming machine Italpast type a/250 for ravioli and cappeletti. Capacity 85-135 kg/H. Includes 2 forms (4&8gr) for capeletti and 1 form (1-1.5gr) for ravioli, conveyor 600mm. New in 2000. Power 4kW. Weight 200kg. Shipping dimensions 1550 X 750 X 1200mm.

Location: EUROPE

Add to Cart View Details

Second Hand Tunnel Furnace Promet PPG800 Stainless Steel

Second Hand Tunnel Furnace Promet PPG800 Stainless Steel

Stock #UG6312

Used stainless steel contact parts tunnel furnace by Promet (PL) type PPG800. Furnace has stainless steel wire belt with width 800 mm x length of tunnel chamber 18 m. Furnace can work on grissini or passover bread. Reported out put in range from 200-250 kg per hour, depending on cake. Fuel - gas. Power consumption 3.2 kW.

Location: Poland

Add to Cart View Details

Used stainless steel cooker/evaporator by Spomasz Pleszew type DUO

Used stainless steel cooker/evaporator by Spomasz Pleszew type DUO

Stock #UG6210

Used stainless steel cooker/evaporator by Spomasz Pleszew (PL) model CAA 9, type DUO. Machine has two boiling pans with total volume 70 l and working volume about 50 l. Both top pans are connected to one bottom tank also with working volume 50 l. Pans are steam heated. Total steam consumption up to 274 kg/h at 8 bar pressure. Top pans are equipped with agitators. Working rotation of agitators up to 74 rpm. Total power consumption 4.1 kW. Reported output on milk masses up to 260 kg/h. Caramel up to 180 kg/h. Last used on food production (confectionary).

Location: PL

Add to Cart View Details

Used Sollich TS 420 Enrober

Used Sollich TS 420 Enrober

Stock #RG9585

Used Sollich Type TS 420 enrober for compound and real chocolate. Suitable for part and full enrobing, with bottomer. Working width 420mm. With hopper for the chocolate, vibration unit and blower inside. With inbuilt tempering worm.

Location: EUROPE

Add to Cart View Details

Used Nielsen Temra 320 Enrobing Machine

Used Nielsen Temra 320 Enrobing Machine

Stock #RG9582

Used Nielsen type Tempra 320 stainless steel enrobing machine for tempered/not tempered chocolate/compound coating. Working width 320mm. Includes feeding table, in-built tempering, freon coating. Machine consists of: removable feeding table approx 300mm long, enrobing machine with double curtain, ventilator, vibrating device, double curtain, grid belt speed and ventilator are adjustable, transparent cover, tempering built in underneath the machine, heatable trough, capacity approx 30 litres, Freon cooled tempering plate, temperature is adjustable, in-built electric control for enrobing machine and tempering. Machine has been partially mechanically overhauled with partially renewed electrics.

Location: EUROPE

Add to Cart View Details

Used IKM Maschinenbau GmbH type 300 Enrober

Used IKM Maschinenbau GmbH type 300 Enrober

Stock #RG9584

Used IKM Maschinenbau GmbH type 300 Enrober with a working width of 300mm. Unit has a stainless stel frame and wire mesh. Includes heated chocolate tank approx 50kg for total and bottom enrobing with a curtain box, fan an vibro. Power 3kW. Perry code and list price in Euros.

Location: EUROPE

Add to Cart View Details

Unused Spomasz Pleszew CAA 18A cooker/evaporator

Unused Spomasz Pleszew CAA 18A cooker/evaporator

Stock #UG6191

Unused stainless steel jam cooker/evaporator by Spomasz Pleszew(PL) type CAA 18A. Machine consits of two top mounted jacketed pans with agitators. Total volume of each pan 70l, working volume 50 l. Volume of jacket 16l. Working pressure of steam on jacket up to 8 bar. Working temperature up to 170C. Steam consumption for two pans - 274 kg/h. Vacuum on inside of each tank - up to 0.8 bar. Each pan is equipped with agitator - driven by el. motor 0.55 kW. Working rotation of each agitator up to 74 rpm. Bottom pan is connected with both top mounted pans. Total volume 60l, working volume up to 50l. Volume of jacket 33l. Working steam pressure on jacket up to 0.5 bar, at steam consumption up to 140 kg/h. Working temperature up to 136C. Bottom pan is equipped with agitator driven by el motor 0.37 kW, working with rotation speed up to 20 rpm. Working output on milk masses up to 260 kg/h, working output on caramel - up to 180 kg/h. Cooker is equipped with vacuum pump with power 3 kW. Shipping dimensions: L 1720 mm x W 1700 x H 1600 mm x weight 877 kg. Includes technical documentation.

Location: PL

Add to Cart View Details

Stainless steel vacuum tumbler Roschermatic type MM-8.0

Stainless steel vacuum tumbler Roschermatic type MM-8.0

Stock #U2181-2

Used mobile vacuum tumbler by Roschermatic type mm-8.0. Machine is equipped with internal tumbling drum with diameter 440 mm x height 560 mm. Total volume of tumbling drum is 85 l. Inlet has a diameter 265 mm. External drum has a diameter 505 mm x depth 625 mm. Top lid hermetically closed, has vacuum connections. Machine is driven by EL. Motor 0.44 kW. Machine has a manually operated tilt discharge.

Location: PL

Add to Cart View Details

Sollich type MK 320 cooling tunnel

Sollich type MK 320 cooling tunnel

Stock #RG9599

Used Sollich type MK 320 cooling tunnel suitable for various coated products. Working width 320mm, working height 1000mm. Includes 1m feeder with adjustable cutting edge. Cooling length approximately 8m with insulating hoods, in-built cooling register, compressor built in center. Delivery 1.5m with cutting edge. Pneumatic control at the back and cutting edge are missing. Driven by a 3.5kW 380 V motor. Unit has been dismantled. The unit can also be sold fully reconditioned with a new cooling compressor, new band control, new electrical control cabinet for an additional cost.

Location: EUROPE

Add to Cart View Details

Sollich type MK 280 cooling tunnel

Sollich type MK 280 cooling tunnel

Stock #RG9598

Used Sollich type MK 280 cooling tunnel suitable for various coated products. Working width 280mm, working height 1000mm. Includes 1.8m feeder with adjustable cutting edge with in-built vibrating platform (2 pneumatic vibrators). Cooling lenght is about 11m with insulating hoods, in-built cooling register, compressor built in centre, cooling register. Discharge is approximately 1.5m with cutting edge. Pneumatic control at the back and scraping knife are missing. Includes driving belt with driving frame with cutting edge, adjustable in height. Mechanically adjustable belt speed, 3.5kW, 380V drive. The unit can also be sold fully reconditioned with a new cooling compressor, new band control, new electrical control cabinet for an additional cost.

Location: EUROPE

Add to Cart View Details

Sollich KK 280 Cooling Tunnel

Sollich KK 280 Cooling Tunnel

Stock #RG9597

Used Sollich type KK 280 Cooling Tunnel. Working width 280mm, working height 1000mm. Includes 1m feeder with cutting edge which is adjustable in height. Cooling length is approximately 6m with (3) insulating hoods, each 2m with inbuilt cooling register. Includes compressor. Delivery 1.5m with cutting edge. Drive is 1.75kW, 380 V, mechanically adjustable speed. Pneumatic control at the back is missing. Unit can be reconditioned with a new cooling compressor, new band control and new electrical control cabinet for an additional cost.

Location: EUROPE

Add to Cart View Details

Second Hand Citrus Fruits Juice And Essential Oil Extractor Speciale Model SP40-4

Second Hand Citrus Fruits Juice And Essential Oil Extractor Speciale Model SP40-4

Stock #UG6282

Used citrus fruits juice and essential oils extractor manufactured by Speciale (Italy) model SP40-4. Unit is designed to extract both fluids without contamination by each other. Model SP40-4 handles citrus fruits in size between 80 and 105 mm. Contact parts are made of stainless steel AISI 304 grade. Up to 3000 kg of fruits per hour at the inlet, 5 feeding sections, output up to 375 pieces per minute, power installed 7.5 HP + 0.3 HP, dimensions 1700 x 1080 x 2520 mm (height), weight 1100 kg, approximate water consumption 1000 l per hour. Previously used as a juice extractor only, the fruit remainings were treaten as a waste.

Location: PL

Add to Cart View Details

CAPPELLETTY PRODUCTION LINE ITALY USED

CAPPELLETTY PRODUCTION LINE ITALY USED

Stock #KG61788

Used Dominioni (Italy) Cappelletty production line, consisting of: -(1) Dominioni model P150S kneader press-extruder new in 2009, rated 150 kg/hour, with kneader capacity 40 kg, power 5kW/220/380V,3/50-60HZ, compressed air 5/6 bar, no dies included, also suitable for long & short pasta making; -(1) Dominioni model D320R forming machine new in 2007, rated 170-220kg/hour, power 8kW/400V,3/50-60HZ. No forming head included. Reportedly used 2-3 days/week since started in 2009. Now in operation 3 days/month.

Location: EUROPE

Add to Cart View Details

Refurbished Aasted-Mikroverk Type At2000 Tempering Machine 2000 kg Per Hour

Refurbished Aasted-Mikroverk Type At2000 Tempering Machine 2000 kg Per Hour

Stock #KS61705

Fully renovated Aasted-Mikroverk SpA type AT2000 tempering machine capacity 750 up to 2000 kg/hour. Includes new control cabinet and new water treatment system, new stainless steel housing. For extra cost available options: - adding controls for external pump with VFD, big sized 96х96 mm temperature gauges, safety pressure proof gauge.

Location: EUROPE

Add to Cart View Details

Nantsune

Nantsune "Meatrobo" High Speed Fresh/Frozen Meat Slicer

Stock #RF3309

Used high-speed fresh/frozen meat slicer, manufactured by Nantsune iron works, model NS300. Slicing dimensions available 330 mm wide X 195 mm high, slice thickness 0 - 8mm, slice capacity 300 per minute. Unit is driven by a 0.75 kW motor and two 0.2 kW motors. New 1989.

Location: Europe

Add to Cart View Details

COOLING TUNNEL

COOLING TUNNEL

Stock #RG9236

New cooling tunnel with a capacity of 25000 cal. Overall dimensions 18M (L) X approx 127.4M (W).

Location: TURKEY

Add to Cart View Details

Chocolate Drop Double Depositor and cooling tunnel

Chocolate Drop Double Depositor and cooling tunnel

Stock #RG9775

New chocolate and fill mix system suitable for 0.1 to 2.5 gr drops. 864 or 108 nozzle in per depositor, 10-14 strokes per minute, water heating and temperature control system, machine pistons are hydraulic other equipment pneumatic, each lobe section has CR-Ni stainless steel piston, machine all parts are modular, machine covers and contact parts are stainless steel, machine electrical and electronic parts are in accordance with food code. Cooling Tunnel has a conveyor belt width of 1000m. Tunnel length 24m. Length of cooling area 22m. Machine body, rectangular metal tubes and sheet metal parts are 304 stainless steel. Top covers of cooling tunnel can be opened and closed on both sides. Option to set up temperatures separately at the inlet and outlet by means of the cooling area with double section. Temperature and motor speed are controlled by Mitsubishi PLC via the touch screen (HMI) from the enrobing machine.

Location: EUROPE

Add to Cart View Details

CHOCOLATE CONCHE TYPE SR 3000

CHOCOLATE CONCHE TYPE SR 3000

Stock #RG7751

New Conche SR 3000 / 3 shaft for mixing, conching and discharging liquid chocolate and paste-like chocolate masses. Useful capacity 3000 kg. Construction in stainless steel. Paint RAL 1015. Driven by 18kW 15rpm motor. Screw driven by 5.5kW motor. Machine consists of: housing with small water jacket. (2) new stirring elements with (2) new stirring arm shafts. (6) bearing flanges for taking up the shafts and drives with new bearings and seals. Automatic bearing lubrication. Feed opening with Rotary Lamella for closing. Opening and closing during the conching or discharging operation is manually possible via switchboard or Programmation. Discharging screw with small stirring elements working in opposite direction during mixing operation. Discharge through evacuation opening. (2) slip-on gear mechanisms of 18 kW each for the drives of both stirring elements, 1 gear of 5.5 kW for the screw drive, with resp. One speed each, German origin, with torque support. Anti-clockwise and clockwise rotation possible, start/stop of the stirring elements for both running directions also possible as well manually via switchboard as via external drive. Indicator of current consumption for both agitation motors. Running time indicator for conching operation. Circulating pump for the water circuit. Switchboard, star-Delta control, reversible for the sensee of rotation, with temperature control and indicator, mass thermometer, indicator for actual value. New documentation, nameplate. CE certification, attestation of conformity.

Location: EUROPE

Add to Cart View Details

Chocolate Conche Drais type TC-1600 FM 1

Chocolate Conche Drais type TC-1600 FM 1

Stock #RG9663

Used stainless steel chocolate Conche manufactured by Drais type TC-1600 FM 1. Capacity 1600 litres. Heated jacket. (2) inlets each 500mm x 500mm. Outlet 150mm. (3) motors each 50kW, 400V. Mixing shaft speed 30/60/90 rpm. Unit has (3) lump breakers driven by 17,5kW/23kW, 400 V motors. Lump breaker speed 1500/300 rpm. Includes switchgear.

Location: EUROPE

Add to Cart View Details

Cheese Plasticise Machine Brinkman 1004A

Cheese Plasticise Machine Brinkman 1004A

Stock #U701V-3

Used cheese Plasticise machine manufactured by Brinkman (Holland) type 1004a. Machine has belt with total width 490 mm and working width 400 mm. Height up to 150 mm. Rolls distance 1550 mm. Machine is equipped with 4 coating brushes, each driven directly by electric motor 0.37 kW. Machine has 6 spraying nozzles, pump and stainless steel tank and compressor. Mounted on wheels.

Location: Perry Poland Warehouse

Add to Cart View Details

CHOCOLATE MOULDING CC 275

CHOCOLATE MOULDING CC 275

Stock #RG7400

Used chocolate moulding manufactured by Carle Montanari, type Confiseur cc 275. Molds 275 X 205 X 28mm high. Output approximately 10 moulds/min = approximately 250kg/hr. Consists of the following: mould warmer, vibratory sections, cooling tunnel, licking rollers, demoulding section, metal detector, central control panel. At least one set of moulds will be included.

Location: EUROPE

Add to Cart View Details

ALPINA PBV 330-1110 CHOPPER

ALPINA PBV 330-1110 CHOPPER

Stock #RG8212

Used stainless steel vacuum bowl chopper manufactured by Alpina type PBV 330-1110. Bowl capacity 330 litre. Includes Bush vacuum pump 160 CBM/hr. Driven by 103kW, 380 volt, 50HZ , DC motor.

Location: EUROPE

Add to Cart View Details

CAPPELLETTY EXTRUDER & FORMING MACHINE

CAPPELLETTY EXTRUDER & FORMING MACHINE

Stock #KG61787

Reportedly very little used Dominioni (Italy) Cappelletty system, consisting of: -(1) Dominioni model P150S kneader press-extruder new in 2009, rated 150 kg/hour, with kneader capacity 40 kg, power 5kW/220/380V,3/50-60HZ, compressed air 5/6 bar, no dies included, also suitable for long & short pasta making; -(1) Dominioni model D320R forming machine new in 2007, rated 170-220kg/hour, power 8kW/400V,3/50-60HZ. No forming head included. Reportedly only installed and test run.

Location: EUROPE

Add to Cart View Details

Wofil Ozon Generator for Water Sterilization

Wofil Ozon Generator for Water Sterilization

Stock #UG6283

Little used water ozonating system by Wofil (PL). Machine had been used in food industry for ozonating water. Ozonated water was used for washing and sterilization of vegetables and fruits. Device consist of ozone generator, buffor tank, separator and two centrifugal pumps.

Location: PL

Add to Cart View Details

500-2000 KG/Hour Duker Rex AEN200 Grinder

500-2000 KG/Hour Duker Rex AEN200 Grinder

Stock #RG9637

Used Duker Rex AWN200 Grinder. Driven by a 55kw and 4kw motor. 500-2000 kg/h depending on product and plates. With stainless steel auger. Stainless steel perforated plates. Plate diameter 200mm with 1.2mm holes.

Location: EU

Add to Cart View Details


Miscellaneous Equipment for Food Processing - USA

2ROLL  36 LONGX18 DIA TURNER 460

2ROLL 36 LONGX18 DIA TURNER 460

Stock #XHG62021

Used carbon steel 2-roll flaking Mill made by E R & F turner (united kingdom) model 460. Water cooled rolls measures: 915 mm total length X 460 mm diameter. The roll drive is driven via heavy duty roll belt by electric motor Brook Hansen 30 kW, 415 V, 735 rpm, 50 Hz, IP55. Includes discharge knife and feeder. Mill is designed for food and feed industry. Last used in food industry.

Location: SLOVAKIA

Add to Cart View Details

HEAT AND CONTROL INC MDL MPO-D2012 OVEN

HEAT AND CONTROL INC MDL MPO-D2012 OVEN

Stock #X20696-08

Used Heat and Control Inc multipurpose oven Model MPO-D2012. Stainless steel belt 20" wide X 18' long. Controls 230/460/volts, 3 phase, 60 cycle, stainless steel frame. Unit is gas fired. The MPO comes standard with one convection zone and multiple impingement zones with humidity control.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details