Filler Liquid Pressure Low Speed


Filler Liquid Pressure Low Speed - Czech & Slovakia

Filler Liquid Pressure Low Speed - Europe

LINE FOR FILLING LIQUID W/GAS 800 BTL/HOUR

LINE FOR FILLING LIQUID W/GAS 800 BTL/HOUR

Stock #VU730

Used semi-automatic line for filling liquid with gas into aluminum bottles (deodorant like). 800 (0.3 LTR) aluminum bottles per hour capacity. Line includes: 1. Semiautomat filler type P2001 2. Semiautomat sealer type P2002 3. Semiautomat gas filler P2011 4. Stainless steel connector between positions 1 & 2 5. Belt conveyer length 4 M, drive in EX. 6. Belt conveyer length 2 M. 7. Sealing quality control 8. Gase system, with active safety EX system working capacity of line: one dose up to 280 ml - can run up to 1000 bottles/hour (about 16 bottles/ minute) maximal capacity of line: one dose up to 280 ml - can run up to 2000 bottles/hour (about 33 bottles/ minute) air consumption: pressure range from 0.6 - 0.8 Mpa total air consumption: 22.3 M3/godz P2001 3.7 M3/godz P2002 1.5 M3/godz P2011 17.1 M3/godz pressured air quality, according to norm ISO 8573-1 in temperature range 15-35C - maximal size of solids - 15 um - maximal density of solids - 8 MB/M3 - maximal content of oil 5 mg/M3 gas Carrier - pressured in range from 1.0 - 1.5 Mpa. Double system of gas feeding on separated dies - propane/butane (flexible dose up to 400 ml) - Co.2 (dose flexible thanks to time) product pressure on filler - minimal 0.1 Mpa (depending on density and viscosity of product) electricity consumption - 0.9 kW (doesnt includes compressors, air cooling system etc) Gase emission during work - 0.33 kg/1000 bottles.

Location: Poland

Add to Cart View Details

Automatic Filling Line for Aerosols 40 pcs/min

Automatic Filling Line for Aerosols 40 pcs/min

Stock #UG6040

Used automatic filling line for aerosols. Reported output about 40 pcs/min. Line is able to work on every type and size of containers (aluminium and steel) line can work on filling gas propan/ butan. Line consists of: - buffer tank for liquid product with agitator, - automatic feeder of aerosol valves, equipped with sorter, - rotating table for feeding aerosol cans, - filling module with two way die for Dosing and two way filling die. Includes sensor of absence of valve and metal Ball Dosing device. - belt conveyer - length 4 M - 2 pieces, - device for mounting atomisers on valves with sorter and feeder, - capper equipped with indexing Wheel, elevator and sorter also line includes 3 pcs of pressure tanks, each 5000 l, for storage of gas, with piping, safety valves and pumps. Includes technical documentation. Line new 1980.

Location: Poland

Add to Cart View Details

Filling line for aerosols by Aerofill up to 35 pcs/min

Filling line for aerosols by Aerofill up to 35 pcs/min

Stock #KG61899

Used filling line for filling aerosol cans with polyurethane foam & capping by Aerofill (UK) model Starpak M16. Line can reach output up to 35 pcs/min depending on dose ranged 90-900 grammes. Includes: - monoblock for filling, - gas chamber with the propellent machine and ventilation system, - gas house with ventilation system and gas detection system, - loading stand, - conveyor system, - labeller (without marker) - control cabinet.

Location: EUROPE

Add to Cart View Details

Filling line for aerosols by Sartech up to 55 pcs/min

Filling line for aerosols by Sartech up to 55 pcs/min

Stock #UG6224

Rebuilded filling line for filling aerosols by Sartech (PL). Line can reach output up to 55 pcs/min and consist of: - filler type NFXF9 - gase filling device, - containers feeding table - plate transporter with length 10 m. - electric control panel - positioning devices for containers with diameter 33 mm and 66 mm. Line in working condition. New 2006.

Location: PL

Add to Cart View Details

Second hand filling and capping machine with 6 filling nozzles & 2 capping dies

Second hand filling and capping machine with 6 filling nozzles & 2 capping dies

Stock #UG6134

Used filling and capping monobloc machine. Machine has a 6 filling nozzles and 2 capping dies. Machine fills bottles, sets caps on bottles and turn them off. Machine is designed for work on glass bottles with volume in range from 15 up to 40 ml. Currently machine is set for work on bottles 40 ml and external diameter 36 mm. Working output up to 5000 bottles/hour. Reported working condition.

Location: PL

Add to Cart View Details

4 nozzles line filler with capper polish made

4 nozzles line filler with capper polish made

Stock #U2297-5

Second hand line filler by Vosko sp. z o.o. (PL). Machine has 4 nozzles simultaneously driven by electric. motor through the belt gearbox and screw. Each piston has internal diameter 60 mm x 100 mm , what gives approx. volume of each piston about 280 cm3. Machine has belt conveyer with width 100 mm x working length 1760 mm. Belt is designed in pp and has working speed adjustable via frequency converter. Machine has local control panel. Dose is adjustable for all four pistons via sensor which sets the upper and lower level of the piston stroke. Filler is equipped with mechanical capper. Capper is driven by el. motor 1.1 kW, 920 rpm, 230-400V, 50 hz and is equipped with belt conveyer with pp belt with width 100 mm x length 2070 mm. Belt has adjustable speed of work. Capper has missing die. Both machines are designed in stainless steel. Shipping dimensions: filler - L 240 cm x W 85 cm x H 170 cm , capper L 210 cm x W 90 cm x H 170 cm. Estimated weight about 1000 kg. Both machines new 2006.

Location: PL

Add to Cart View Details


Filler Liquid Pressure Low Speed - USA