Sheet Extrusion Lines


Sheet Extrusion Lines - Czech & Slovakia

Sheet Extrusion Lines - Europe


Sheet Extrusion Lines - USA

30

30" Wide Johnson 3-Roll Sheet Down Stack

Stock #ZP57684-1

Used Johnson 16" diameter X 30" wide three-roll sheet down stack. Pneumatically operated cored chrome rolls, rolls are driven by a silent chain drive, drive gearboxes for both the chrome rolls and the pull rolls operate at 1.0, 2.07, 5.058 and 10.465:1 ratios. Pull rolls are 8" diameter X 30" wide and have been newly recovered. Pull roll is driven by a 3 HP, 180 volt DC motor through a gearbox. Drive motor for the chrome rolls not included.

Location: Midwest USA

Add to Cart View Details

34

34" Wide Cincinnati Milacron 2-Roll Cooling Roll Stack

Stock #ZP58170

Used Cincinatti Milacron 2-roll cooling roll stack including unwind. Also included in package is the following: - 18"X34" wide 2-roll chrome plated cooling rolls - Driven by 5 HP DC motor Rolls are cooled via (3) 5 HP pumps with heat exchangers. Has (2) rubber coated pull station, 18" diameter X 34" wide. Pneumatically operated and driven by same motor as above chrome rolls. Includes unwind stand for 40" diameter rolls.

Location: Midwest USA

Add to Cart View Details

36

36" Wide Davis Standard Sheet Extrusion Line

Stock #ZP61339

Used 36" wide Davis Standard sheet extrusion line consisting of the following: - Used Davis Standard sheet extrusion line consisting of 4.5" Davis standard 34:1 L/D extruder driven by a 250 HP DC motor with SCR control. Has electrically heated water cooled, vented (plugged) barrel with hes model 301 controls. - Has Xaloy EH-45 screen changer with hydraulic pumping system - 15 HP gear pump - 36" wide EDI flex lip model H40 sheet die - Davis Standard/Marshall & Williams 3-roll stack with 16" X 36" wide polished chrome cored rolls and silent chain drive with hydraulically actuated closure. - (4) advantage Sentra temperature control units.

Location: Midwest USA

Add to Cart View Details

40

40" Wide Johnson Sheet Extrusion Line

Stock #ZP60327

Used 40" wide Johnson sheet extrusion line consisting of the following: - 4.5" Johnson 24:1 L/D vented extruder with water/air cooling on barrel. Includes DC motor with Pacemaster DC drive and 11.1:1 gearbox ratio. Includes temperature control panel and Beringer model NC-45 compact screen changer. - Downstream includes 36" wide flex lip extrusion die with restrictor bar. Includes 18" X 40" 3-roll chill roll stack, steel roll conveying system, and chill roll pumps and heat exchangers. Also includes Johnson rubber pull roll assembly and Wysong shear. - Also included is 1994 Larkin 60 ton chiller.

Location: Midwest USA

Add to Cart View Details

40

40" Wide Sterling Co-Extrusion Sheet Line

Stock #ZP60105

Used 40" wide Sterling co-extrusion sheet line. reconditioned in 1998-2000 to produce films of synthetic paper 4-20 mils thick. Line consists of the following: 3.5" Sterling 30:1 L/D extruder driven by a 125 HP DC motor with Allen Bradley series "B" SCR controller, 440 volt AC input. Extruder is electrically heated and water cooled including closed loop water cooling system and side vented (plugged) barrel. With 14/1 gearbox ratio. Maag melt pump currently mounted on 3.5" extruder. 2.5" Sterling co-extruder, 30:1 L/D with 13.351 gearbox reduction and 50 HP DC motor with SCR controller. Has electrically heated water cooled barrel with closed loop water cooling system. 2.5" Entwhistle co-extruder, 30:1 L/D with non-vented barrel, driven by a 50 HP Reliance DC motor with SCR control. Each of the above extruders are equipped with 3.5" MGB Engineering screen changers with oversized 3HP hydraulic pumping system for all three changers. Mann and Hummel 4-component resin volumetric dosing system for the 3.5" extruder and resin loaders for the 2.5" co-extruders, including vacuum pump. Co-extrusion feed block for the three extruders and a Cloeren 1200mm (47") epoch III flex lip sheet die with lip opening .000"-.050" and lip slot with 1120mm (44"). 40" wide Sterling hydraulically loaded chill roll stack including hydraulic pumping system. Downstack operation including temperature control package with heat exchangers and pumps and rubber pull roll assembly. NDC model 6100TC thickness gauging system with NDC model 103 sensor probe. Solo systems 2-sided Corona treating station for 40" webs and Softal generator type 3009RV for up to 3.5kW. Rosenthal 48" sheeter, new 2000 for sheeting 3-20 mils synthetic paper includes (2) unwinders for rolls 36" diameter X 500 lbs each on 6" cores. Sheeter includes heavy duty score cuts slitting for maximum 4 slits and speed 23-24 meters per minute. Has output conveyor 36" long. Sheeter is currently working inline at this time. 40" Egan single turret winder for 36" diameter rolls including dancer and lay-on roll. Still installed as operated.

Location: Mexico

Add to Cart View Details

50

50" Wide Processing Technologies Inc 3-Roll Down Stack

Stock #ZP61834

Used Processing Technologies Inc. 3-roll downstack model 5024 serial no. 297-CRS manufactured 2/2000 24" diameter X 50" wide lower 2 chrome rolls upper roll is 12" X 50" all chrome rolls cored for cooling rolls are hydraulically operated and powered by a 7.5 HP DC motor via silent chain drive Control Techniques Mentor II DC drives for stack and pull roll station pull rolls pneumatic operation and powered by a 5 HP DC motor cooling via 3 X 10 HP pumps into heat exchangers

Location: Midwest USA

Add to Cart View Details

60

60" Wide Prodex Sheet Extrusion Line

Stock #ZP61016-2

Used 3.5" Prodex sheet extrusion line consisting of the following: 3.5" Prodex 32:1 L/D extruder. Includes approximately 150 HP DC motor with SCR control. Has flex lip sheet extrusion die with choker bar, 16" diameter X 60" wide downstack chill roll stack, cooling conveyor, pull roll stand, and turret winder for approximately 30" diameter rolls. Still installed as operated.

Location: Northeast USA

Add to Cart View Details

62

62" Wide Gloucester Engineering Sheet Extrusion Line w/6" Gloucester Vented Extruder

Stock #ZP62577

Used 62" wide Gloucester Engineering sheet extrusion line previously used on styrene. Line includes the following: 6" Gloucester 32/1 L/D vented extruder with Gloucester screen changer 90/90 gear pump with Thermo profiler Co-ex block 60" Ultraflex H-75 EDI die Gloucester 3-roll chill roll stack, (3) 24" D x 62" W rolls, cooling pumps/ heat exchangers, AC motors and drives, sheet treatment, pull rolls. Single position Hobbs winder Still installed as operated Co-extruder not included.

Location: Northeast USA

Add to Cart View Details

66

66" Wide Sterling Sheet Extrusion Line

Stock #ZP60422

Used Sterling sheet extrusion line consisting of the following: 4.5" Sterling 36:1 L/D single screw extruder driven by a 200 HP DC motor with SCR control. Extruder has 78" centerline. Previously used extruding horizontally into chill roll chrome nip roll. Extruder is double vented (1 vent presently plugged) and includes vacuum system and closed loop water cooling system for barrel heat/cool. Includes (2) spare screws. 4.5" Sterling hydraulic plate screen changer with hydraulic power pack. 15 HP Luwa mill pump. (2) sheet extrusion dies as follows: - 66" Johnson flex lip sheet die with 45 degree restrictor bar and removable lower lip supplying .001 through .250" gap. - 60" EDI H75 sheet extrusion die for .001 through .075" gap. 66" wide Sterling sheet cooling roll take off with (4) cooling/polishing rolls mounted in a cast line configuration. Extruder therefore extrudes downward into (2) 8" diameter chrome rolls which then "S" wraps through (2) 14" diameter chrome rolls. All chrome/polishing rolls are individually driven by a DC motor with SCR controls. Has idler roll conveyor and (2) rubber pull roll haul off. Includes spare chrome/polishing rolls as follows: - (2) 8" diameter and (2) 14" diameter (2) dual zone oil temperature control units (4 zones total) for use with chrome/polishing rolls. Wysong 72" shear model 1272. Sheet stacker for use with shear for automatic stacking of extruded cut sheets. Conair desiccant dryer withe 4000 lb hopper. Equipment reported completely rewired and some items rebuilt and used sparingly after rebuilding.

Location: Canada

Add to Cart View Details

1200mm Wide Toshiba Multi-Layer Sheet Extrusion Line

1200mm Wide Toshiba Multi-Layer Sheet Extrusion Line

Stock #ZP54282-2

Used 1200mm wide Toshiba multi-layer sheet extrusion line previously used for PP/PS, 1200mm maximum width, .2-1.0mm maximum thickness. Line consists of (2) Toshiba 90mm extruders, 32:1 L/D, model SW120 screen changer, 1600mm sheet extrusion die (63"), polishing roll stand 1800mm width (70.8") X 300mm diameter (12"), 1600mm sheet cutter, and 1500mm turret winder.

Location: Japan

Add to Cart View Details