3.8 Meter Jagenberg Rewinder
Stock #ZW62937
Jagenberg model VARI DUR 43 – 15 A rewinder
-Useful width 3.800 mm
-Paper from 90 – 390 gr/m2
-Speed maximum 1.300 m/min
-Unwinding diameter 2.200 mm
-Rewinding diameter 1.500 mm
-Drive installed 2 x 84,7 kW/1.750 rpm/440V DC
-Generator brake 108 kW/2.180 rpm/440V DC
-Automatic positioning knifes by Pasaban in 2002 with ABB tension control
-No electrical cabinets or controls
-Overhaul 2002 and 2003
Location: SPAIN
Add to Cart
View Details
85" Wide Jagenberg Vari-Dur Winder
Stock #ZW62733
Used 85" wide Jagenberg Vari-Dur winder. Model Vari-Dur, serial #E820024.
(2) 20" bed rolls
Maximum speed 3250 FPM, operating speed 2500 FPM
With slitter section
With shaftless floor pick up
60" diameter maximum roll
With (2) Falk gearboxes, (2) 40 hp motors made in USA. Contract #V82078
With unwind stand Model DAE/15K
Mfg: Jamesbury
Location: Northeast USA
Add to Cart
View Details
88" (2.25 Meter) Wide Bruderhaus Rewinder
Stock #ZW58665
Used 88" (2.25M) wide Bruderhaus rewinder new in 1965 with rebuilt in 1975. Table width: 2250 mm, unwinder for a cores of pope reel with drum brake diameter maximum rewind 1.200 mm reel lowering table and drive Indar at 45 CV.
Location: EU
Add to Cart
View Details
100" (2.54 Meter) Wide Jagenberg-Emua Rewinder
Stock #ZW58747
Used 100" (2.54M) rewinder Jagenberg built by Jagenberg-Emua and installed in 1975. Type: Vari-Dur with a table width: 2.540 mm. Diameter of the drum: 420 mm unwinder for cores of machine ABB at 90 kW. Maximum unwind diameter of 2000 mm, and a maximum rewind diameter of 1500 mm. Includes reel lowering tables and 2 each ABB drives at 37kW.
Location: EU
Add to Cart
View Details
102" (2.59 Meter) Wide Mecagraf-Kontrelmec Rewinder
Stock #ZW56911
Used 102" wide rewinder by Mecagraf-Kontrelmec. For 35-350 gr/M. Working width 1.600mm, diameter rewinder unwind 1.500mm diameter rewind 1.000mm. Expandibles cores rewind diameter 70mm,76mm. Expandibles cores unwind diameter 70,76, Y 150mm. Pneumaticall circular knifes Helios 6 units. DICS brake re 250 and automatic brake control system for to discharge the spools. Machine in running condition rated for a design speed of 1300 FPM (400M/min) includes control panel.
Location: EU
Add to Cart
View Details
104" Wide Valmet Model KL200 Rewinder
Stock #ZW61424
Used approximately 104" Valmet 2-drum rewinder consisting of the following:
Shaftless backstand with adjustable floor pick up and 3" and 6" EE chucks. Rated at 72" O.D. Roll.
Valmet rewinder serial #268. Model #kl200. New in 1990. Contract #24414. 108" X 30" drum rolls. Front roll is smooth and back roll is grooved. Roll dump discharge. Has (2) 75 HP Reliance motors. With (5) shear cut adjustable blades. 60" shaftless rewind. Reported 6,000 FPM.
Location: Northeast USA
Add to Cart
View Details
116" Wide Bruderhaus Two Drum Winder
Stock #ZW62481
Used 3 meter Bruderhaus two-drum rewinder, has a regenerative brake, AC induction motor and the corresponding drives. Also has a rider roll loading the paper through the drums.
The maximum working width is 3 mts, (116"), with automatic wide regulation through a motorized screw system for the master reel base.
The maximum running speed is 1500 mpm. This machine is used to operate with a wide range of grades, from 35 gr/m2 sulfite to coated/gloss paper of around 240 gr/m2.
The control system, drives, motors, and load cell were upgraded in 2010 to an ABB System, with 800XA DCS compact version, AC800 controller, ACS800 regenerative multidrive.
Gearboxes are Flender, disk brakes are Hilliard, and the electric motors are M3BP ABB Series.
Pneumatic and hydraulic components are Festo and Rexroth.
Location: South America
Add to Cart
View Details
175" (4.45 Meter) Wide Jagenberg Slitter/Rewinder
Stock #ZW61417
Used 175" (4.45 M) Jagenberg 2 drum slitter/rewinder
type of paper to be slit: machine GKAZE and tissue crepe paper
crepe % for crepe tissue: 3-18%
gram weight for crepe tissue: 16.5-40 G/M2
gram weight for machine glaze papers: 16.5-125 G/M2
working speed of rewinder: 500-850 M/min
through-put capacity with one ply: 65-75 T/Day
carton core diameter to be used: 3-6 inch
maximum paper width at pope reel: 4450 mm
maximum Pope reel diameter: 2500 mm
spoon roll diameter: 360 mm
number of back stand: 2
maximum working speed of rewinder: 1000 M/min
dust control equipment: no
automatic knife positioning: no
maximum quantity of cuts on rewinder: 33
minimum cut width: 120 mm
maximum paper width at the rewinder exit: 4450 mm
maximum paper diameter at the rewinder exit: 1150 mm
Location: MIDDLE EAST
Add to Cart
View Details
248" (6.2 Meter) Wide Wartsila Winder
Stock #ZW60791
Used 248" 2 drum Wartsila winder. New in 1983. Machine is equipped W/ Stromberg drives retrofitted with Allen Bradley control logic control system W/ Rockwell Reliance drives (2003) and Jagenberg soft rear drum. Max slitting width 6000mm. Design speed 45 M/S for newsprint paper grade 49 G/M2. with 7 slitters
Location: AUSTRALIA
Add to Cart
View Details
333" (8.3 Meter) Wide Jagenberg 2-Drum Winder
Stock #ZW62198
Used Jagenberg 333" (8.3M) wide vari-step 90 twin drum winder. Unit has type 30V magazine right hand unwind stand. New 1989.
Location: South USA
Add to Cart
View Details
344" (8.6 Meter) Wide Jagenberg Single Drum Winder
Stock #ZW62197
Used Jagenberg 344" (8.6M) wide vari-top model 850-150 single drum winder.
Maximum rewind diameter 60" the center drum diameter is 1.5 meters.
Last used on newsprint 44.8-52 GSM.
Maximum operating speed at basis weights up to 52 GSM is 8100 ft/min.
Machine has maximum of 12 slitting stations.
Maximum diameter of unwind stand 109".
Still installed.
Location: South USA
Add to Cart
View Details