Pelletizing Lines


Pelletizing Lines - Czech & Slovakia

Pelletizing Lines - Europe

Pelletizing Line with Twin Screw Co-rotating Extruder Werner & Pfeiderer ZSK 40

Pelletizing Line with Twin Screw Co-rotating Extruder Werner & Pfeiderer ZSK 40

Stock #UP5991

Used pelletizing line equipped with twin screw, co-rotating extruder by Werner & Pfeiderer Model ZSK40 with LD ratio 33 with side feeder and double vacuum vent. Maximal screw rpm 300. Machine is driven by el. motor 22 kW. Working output up to 100 kg/h. Extruder has Ktron Soder T20 doser and Ktron Soder S210 "loss in weight" feeders. Extruder has 5 strand die head and 2 m long water bath. Scheer air knife model WAS 200 and 100 mm wide Scheer pelletiser model SGS 100-E.

Location: UK

Add to Cart View Details

3.3

3.3" 40/1 Bandera Regranulating Line

Stock #UG6186

Second hand regranulating line manufactured by Costruzioni Meccaniche Luigi Bandera SPA (Italy). The line consists of: 1) single screw extruder type TR.85: * screw diameter 85 mm; * L/D = 40/1; * working speed = 144 obr./min; * electric motor 90 kW, 1478 rpm, 169 A; * 12 heating coils; 2) powerpack; 3) dosing device; 4) dosing device for pigments; 5) filter changer 190; 6) cutting die; 7) centrifugal dryer feeder; 8) centrifugal dryer; 9) vibrating screen; 10) granule feeding blower. Power: 380 V, 50 Hz, 3 ph. Max. power: 185 kW.

Location: Poland

Add to Cart View Details

5.9

5.9" 33/1 Line For Recycling Plastics

Stock #UP5937

Used line for recycling plastics, chinese made. Line includes: auger feeder driven by electric motor 7.5 kW. Single screw extruder with screw diameter 150 mm (5.9") and LD ratio 33. Screw made of 38CrMoAl. Main motor DC 160 kW. Barrel has degassing and ten heating sections. Extruder is equipped: - die type T-die, screenchanger (driven 2.2 kW) and automatic control of screens. - water cut type pelletizer , driven by 2.2. kW. - electronic control Siemens brand Inverter - pump for cooling water - vibrating screen, two vibrating motors 0.4 kW each. - spin dryer driven by 5.5 kW and working with rotation speed 1400 rpm. - drying drum/ hot air - with volume 2M3 and blower 3 kW. Reported output on plastic garbage for HDPE ,PP 500 kg/h. Some spare parts included.

Location: Poland

Add to Cart View Details


Pelletizing Lines - USA

W&P ZSK 92 with WRG 200 water ring pelletizer

W&P ZSK 92 with WRG 200 water ring pelletizer

Stock #ZP62672

Used Werner & Pfleiderer pelletizing line, new 1997, consisting of the following: - (3) Brabender loss in weight feeding system consisting of (2) Brabender pellet loss in weight feeder for up to 2200lbs/hr (1000kg/hr). (1) Brabender liquid loss in weight feeder for up to 44 lbs/hr (20kg/hr). - Werner & Pfleiderer ZSK 92 co-rotating twin screw extruder. Has 36/1 L/D, 9 housing sections, electrically heated, water cooled. Max screw speed is 400 rpm via a gearbox by a 525 hp/350Kw motor. No side feeder included. - (1) Gneuss screen changer - (1)Werner & Pfleiderer watering pelletizer, type WRG 200 including pellet dewatering and drying unit - (1) SOMOS pellet drier by SOMOS - (1) Pellet Classifier - (1) SWECO Sifter/Separator - (1) Control panel Previously used in a Masterbatch application.

Location: Asia

Add to Cart View Details

Plastic Foil Recycling Line

Plastic Foil Recycling Line

Stock #XZS61286

Used plastic foil (mainly low-density polyethylene, LDPE) recycling line. Italian made, new in 2003. Including the following: feeding conveyor, shredder, feeding auger, washer, cleaning system, mechanical (centrifugal) dryer, heat dryer, blower, cyclone, receiving silo, flake compactor. Reported to be in good condition.

Location: EU

Add to Cart View Details

Used 200mm Buss Ko-Kneader pelletizing line,1999

Used 200mm Buss Ko-Kneader pelletizing line,1999

Stock #ZP63050

Used 200mm Buss Ko-Kneader pelletizing line, new 1999. Line consists of: - Buss Compounder, Model MDS200, serial #99-410820. Has Knodler gear reducer type FZ1200.2-A-Z, N1 1500, N2 65, M2 Max 15,000 Nm. Driven by a 100 HP Reliance DC Motor and SCR control, 1750/2000 RPM. Includes temperature control panel. - Buss hot face pelletizer cutter with controls.

Location: Midwest USA

Add to Cart View Details

Used 18mm Leistritz Twin Screw Pelletizing Line

Used 18mm Leistritz Twin Screw Pelletizing Line

Stock #ZP62946

Used Twin Screw Pelletizing Line consisting of the following: 18mm Leistritz 40/1 L/D co-rotating twin screw extruder. Model Micro18/GGC-40D, serial #2468, new 1996. Has (8) barrel sections consisting of (1) jacketed feed, (1) vented, (1) vented and plugged, and (5) non vented barrel sections. Electrically heated, water cooled barrel. Driven by a 2.3 kw DC motor with SCR controller, 210/260 volt, 2950 rpm. Unit has 500 rpm screw speed. Includes control panel, 10" wide x 180" long cooling conveyor, Beta Lasermike thickness guage (new 2003), and 4" wide Randcastle strand pelletizer (new 2000).

Location: Midwest USA

Add to Cart View Details

1.0

1.0" 40/1 Prism Pelletizing Line

Stock #ZP61704

Used Prism pelletizing line consisting of the following: (1) Prism parallel twin screw extruder, model TSE 24TC, 24 mm co-rotating screws, 40:1 L/D, electrically heated, water cooled barrel, (3) top vents with (2) plugged, 6 barrel zones with on board control panel, 3.7 kW, 230 volt AC motor drive with VFD controller, two hold stand die, serial# 2077, one (1) screw feeder with .26 kW motor drive with agitated hopper, one (1) Maguire weigh scale feeder, model WSB-440R, (3) material hoppers, (1) additive feeder with hopper with controller, serial# B120792, one (1) Prism water bath pelletizer unit, model varicut 24, with approximately 8" x 8" x 59" long stainless steel water bath, 2.5" wide air wipe with blower, 2 5/8" wide stand pelletizer with pull rolls, helical rotor, 1.1 kW motor drive, serial# 2076, system. New 1996.

Location: Midwest USA

Add to Cart View Details

2.4

2.4" Erema LDPE/LLDPE Film Reclaim Line

Stock #ZP62947

Used 2005 Erema LDPE/LLDPE Film Reclaim Line consisting of the following; - 23.6” wide X 16’ long inclined cleated conveyor with metal detector. - 800 mm (31”) diameter integral Densifier/Agglomerator. Driven by a 40 hp motor. Includes infeed hopper with conveyor and pull roll feed. Has moisture/fines removal system. - Erema 63 MM 7/1 L/D air cooled extruder. Model KAG800/63, Serial #P04/172. Driven by a 20 hp AC motor with invertor. Includes control panel. - Erema Hot Cut Pelletizer. Model HGL120. Includes pellet cooling blower and cyclone. Line presently installed and can be seen in operation. Rated at approximately 400 lbs/hr.

Location: Midwest USA

Add to Cart View Details

2.2

2.2" 36/1 W&P ZSK58 R&G Co-Rotating Twin Screw Extruder Pelletizing Line

Stock #ZP62528

Used W&P (Coperion) ZSK58 co-rotating twin screw extruder pelletizing line. Line has been refurbished and includes a 58mm super compounder supplying 960 Newton meters per shaft, 519 rpm screw speed. Extruder is driven by a 150 hp (new) Weg AC motor, 380 volt, 50 hz, 3 phase, 1500 rpm. Has 3.41/1 gear ratio. Included is 1 pair of splined shafts with screw elements, operator control panels, and water pump with reservoir. Downstream includes NGR Model HD300 die face water ring pelletizer, including water ring, spin dryer and and water recirculating tank. Spare screw shafts available with elements at an additional cost.

Location: Middle East

Add to Cart View Details

2.7

2.7" Erema Film Recycling Line

Stock #ZP61675-2

Used 2008 Erema model PC906T/117 film recycling line consisting of the following: - 70mm Erema single screw non-vented extruder fed from Erema compacting/densifying hopper. Includes approximately 24" wide X 20' inclined conveyor, water ring pelletizer, and operator controls.

Location: MEXICO

Add to Cart View Details

3.2

3.2" 38/1 Berstorff Co-Rotating Twin Screw Extrusion Line

Stock #ZP62247

Used 81mm Berstorff model ZE75AX38D-UTX co-rotating twin screw extrusion line, new in 2004. Extrusion line is rated 700 kg per hour. Previously used for extruding 35% talc/ath into either PP or PVB. Maximum screw rpm is 600. Line consists of the following: - 81mm Berstorff co-rotating twin screw extruder with 38/1 L/D. Driven by 316 kW motor including operator controls. Includes screen changer, Kryenborg model K-SWE-180/RS screen changer. Downstream includes BKG Compact 75/Master 300 underwater pelletizing system. Still installed as operated as of July 2019. Running on PET flakes & HDPE bottle caps after wash line. PET 700 KG/HR HDPE 600 KG/HR

Location: Europe

Add to Cart View Details

4.5

4.5" 30/1 Sterling Vecoplan Cumberland Plastics Recycling Facility

Stock #ZP62778

Used plastics recycling facility consisting of the following: Vecoplan Model RG52-100 single rotor shredder including feed conveyor Cumberland Model CT5090 granulator driven by a 100 hp motor including blower discharge 4.5" Sterling strand extrusion line, 30/1 L/D driven by 200 hp motor, cooling trough, screen changer, air knife and 14" Cumberland pelletizer. Also includes Rotex classifier. 3,000 amp service (2) box dumpers and miscellaneous bins, hoppers etc. Equipment is still installed as operated.

Location: Southeast USA

Add to Cart View Details

4.5

4.5" 32/1 L/D Davis Strand Pelletizing Line

Stock #ZP63040

Used 4.5" Davis strand pelletizing line, still installed and running, PP,PE,TPO & TPE at 900-1000 lbs/hour. Includes a 4.5" Merritt Davis 32/1 L/D vented single screw extruder with operator control panel. Driven by a 150HP DC motor with SCR controller. Includes a slide plate screen changer, a strand die and SS water bath for strand cooling. The line is equipped with a Berlyn air knife, 6", 8 knife Cumberland pelletizer, Witte classifying screen, Gala 8.2BF spin dryer and a 3,000 lb batch steel Brower vertical mixer, Model 4934VP post mixer. In addition the package includes a 75 ton Van Dorn injection molder and 15 ton air cooled chiller. Still installed and operating.

Location: Midwest USA

Add to Cart View Details

5.9

5.9" 10/1 Baker Perkins Ko-Kneader Pelletizing Line

Stock #ZP50423

Used Baker Perkins Ko-Kneader pelletizing line consisting of the following: Baker Perkins UPK-150UEM 150mm Ko-Kneader, 10:1 L/D, split barrel, jacketed for 300 psi, powered by a 250 HP drive. Screw rpm 32-126. Includes size 6 Baker Perkins crammer, 10 HP, 8" Baker Perkins cross extruder, 6:1 L/D with jacketed barrel, cored screw, vented, 100 HP. Also has Baker Perkins hot cut water ring pelletizer, size 8, 15 HP variable speed, 200 GPM capability with model 102BF Gala spin dryer.

Location: Midwest USA

Add to Cart View Details

5.0

5.0" 7/1 Buss Ko-Kneader Package

Stock #ZP55827

Used Buss Ko-Kneader package model 1418. Has 140mm Buss Ko-Kneader, 11:1 L/D, oil heated barrel and screw with motor and crammer feeder. Has 180mm cross head extruder, water heated screw and equipped with motor. Mounted on extruder is an electrically heated hot cut pelletizing system. Originally new 1972. Taken out of service 9-03. Reported max 3000 lbs/hr for molding grade rigid PVC.

Location: Midwest USA

Add to Cart View Details

5.5

5.5" 7/1 Buss Compounding Line

Stock #ZP61731

Used Buss PR140 compounding line consisting of the following: Buss model PR140 Ko-Kneader with approximately 7/1 L/D. Driven by approximately 50 HP motor. Includes jacketed barrel, Brabender starve feeder, belt driven to AC motor. Has 6" flat die at discharge 2-roll inclined chill roll package, 8" diameter X 36" wide. Has approximately 36" wide cooling belt X approximately 20' long. Line is still installed as operated.

Location: MEXICO

Add to Cart View Details

5.9

5.9" 36/1 Granulator/Compounding Extruder

Stock #ZS61287

Unused pet flakes granulator / compounding extruder. Transforms pet flakes (from recycled pet bottles) into granules. Chinese made by Jiangyin City Xinda Plastics Machinery China. Single screw extruder with screw diameter 150 mm (5.9") and 200=LD-200 ratio 33. Screw made of 38CrMoAl. Barrel has degassing and (10) heating sections. Auxiliary equipment includes: auger feeder driven by electric motor 7.5 kW; cooling receiver, water chiller, pump for cooling water, vacuum pump, control panel. Reported output on pet flakes 0.5 tph.

Location: Europe

Add to Cart View Details

6.7

6.7" 30/1 Werner & Pfleiderer Twin Screw Extruder

Stock #ZP62122

Used 170mm Werner & Pfleiderer 30/1 L/D vented twin screw extruder with a co-rotating screw design. Has oil heated water cooled barrel and includes screen changer, die plate, model UG300 cutter, Carter Day spin dryer, and quench water tank. Extruder is vented in section 5, has Renk gearbox with 5.88:1 gear ratio, 1500 HP 1185 rpm AC motor, 4160 volt input.

Location: West Coast USA

Add to Cart View Details

6.2

6.2" 17/1 Werner & Pfleiderer Co-Rotating Twin Screw Pelletizing Line

Stock #ZP60325

Used 160mm Werner & Pfleiderer co-rotating twin screw pelletizing line. Line consists of the following: 160mm Werner & Pfleiderer twin screw extruder with 17/1 L/D (6 barrel sections). Extruder is driven by approximately a 400kW main drive, has electrically heated water cooled barrel, and includes cooling system for gearbox. Extruder is reported reconditioned and was never put into use after reconditioning. Downstream includes water ring pelletizing system.

Location: ITALY

Add to Cart View Details

6.2

6.2" 33/1 Sorema Pelletizing Line

Stock #ZP61990

Used 160mm Sorema pelletizing line consisting of the following: Sorema 160mm vented extruder with 33/1 L/D. Previously used on PE, PP and PS. Has 12-zone temperature control panel, hydraulic screen changer, Beringer model 12V pelletizer with centrifugal dryer but no motor or control panel. Owner reports barrel was recently replaced and has approximately 200 hours service.

Location: United Kingdom

Add to Cart View Details

6

6" 34/1 Berlyn Single Screw Pelletizing Line

Stock #ZP62686

Used 6" Berlyn 34/1 L/D single screw pelletizing line. Line consists of the following: 6" 34/1 Berlyn 400 hp single screw extruder with DC motor but no SCR control. Includes temperature control panel and is equipped with 6" Berlyn screen changer and hydraulic pump. Berlyn underwater pelletizing system with controls, K-tron feed system for 4-component gravimetric feeding, and spin dryer. New approximately 1985.

Location: South USA

Add to Cart View Details

7.8

7.8" 16/1 Francis Shaw Banbury Compounding Package

Stock #ZP53117

Used Francis Shaw Banbury compounding package consisting of the following: Francis Shaw K2A Banbury mixer with 600 HP DC Siemens motor 0-1500 variable rpm, 60 pound batch weight for material with specific gravity 1.0. Estimated 500-1500kg/hr capacity depending on materials. Dumps into 220 mm extruder, 16/1 L/D, with oversized hopped and ram feed. Extruder barrel is electrically heated, air cooled and includes temperature panel. Still installed as operated. No pelletizer or downstream equipment included.

Location: HUNGARY

Add to Cart View Details

8

8" Buss Extrusion Compounding Line

Stock #ZP62735

Used Buss Model MKS200-14F280-6 extrusion compounding line. Line is new in 2000 with limited use from 2005 to 2008. Includes Gala underwater pelletizing system with spin dryer. Line rated at 1500-1750 kg per hour for PVC.

Location: Australia

Add to Cart View Details

8

8"/6" 30/1 Leistritz Dual Diameter Film Reclaim Line

Stock #ZP58163

Used 200mm/150mm (8"/6") Leistritz dual diameter film reclaim line. Line new 1982. Reported new barrels and screws 2003. Extruder driven by 260 kW motor, has PHT water ring pelletizing system new 2003, includes Vicoplan single shaft shredder with 90 kW motor and operator control panel.

Location: EU

Add to Cart View Details

40mm Extricom

40mm Extricom "Ring" Compounding Line Mdl RE XP

Stock #ZP62837

Used 40mm Extricom "Ring" compounding line, Model RE XP with 12 screw shaft, 32/1 L/D, driven by 312KW AC motor woith VFD drive. Package consists of: single component screw feeder, operator controls, N & B (Korean) underwater pelletizing system including water tempering system and spin dryer. Line is still installed as operated.

Location: KOREA

Add to Cart View Details

200 KG Per Hour Green Max Polystyrene Foam Compactor Model Apolo C200

200 KG Per Hour Green Max Polystyrene Foam Compactor Model Apolo C200

Stock #ZP62526

Used Green Max polystyrene foam compactor, Model Apolo C200. Unit is rated at 200 kg per hour, has a compression ratio of 50:1, and supplies compressed density 200 to 400 kg per cubic meter. Total power comsumption 19.55 kw. The unit has screw compression technology producing a continuous log at a ratio of 50:1. Compression is performed in a mechanical nature, therefore no fumes are created. Includes operator control.

Location: Northeast USA

Add to Cart View Details

200 KG Per Hour Greenmax Model MC200 XPS Heat Densification System

200 KG Per Hour Greenmax Model MC200 XPS Heat Densification System

Stock #ZP62447

Used Greenmax Model MC200, 200 kg per hour EPS and XPS heat densification system. System consists of 37.5 kw (50 hp) screw densification barrel fed by 38" x 21" feed hopper. Includes operator control panel, electrically heated barrel and system, new in 2017 with limited use.

Location: Midwest USA

Add to Cart View Details